Smeg SRV876C6 [18/18] Instructions for the user

Instructions for the user

8.2 Cleaning of cooking hob components

CAUTION: do not wash these components in a dishwasher.

In normal use of the hob, the stainless steel burner caps and pan-

stands tend to be burnished by the high temperature. Clean these

parts using very fine abrasive sponges or similar commercial products.

Then use a specific paste polish to restore the steel’s shine. Your local

authorised after-sales technician is able to supply professional

products for appliance cleaning and care.

Grids, caps, flame cap crowns and burners can be

removed for ease of cleaning. Wash them in warm

water using a non-abrasive detergent, taking care to

remove all tough spots. Before remounting, allow the

components to fully dry out. In fact, humidity residues

inside the burner holes might impair burner operation.

8.2.1 Ignition plugs and safety devices

For good functioning of the lighting ignition plugs and the safety

devices, keep them very clean.

Check frequently and clean with a damp cloth when necessary.

8.2.2 The cover

Clean the glass or steel cover, where mounted, with warm water.

Never use abrasive sponges or detergents.

Attention: the glass lid may break if overheated. Make sure that all the

burners are switched off and let them cool down before lovering the lid.

After cleaning, the appliance must be dried thoroughly since detergent

and water drips might damage its operation and appearance.