Ada zve 350 sd [14/50] Zve 350 sd

ZVE 350 SD

Operation Precautions

a) Please read the safety instructions carefully, choose desirable work area for fear causing danger.

b) The probe is flexible to help you operate in hard-to–reach areas. Please don’t insert or bend by force.. Please do not over bend any part

of the probe. Normally, the bending radius should more than 5cm to prevent from causing permanent damage to the probe.

c) Don’t use the probe or camera head to modify surroundings, clear pathways or clogged areas. It couldn’t be used as a fishing rod or tape.

d) The hand-held display unit is not waterproof .The camera head and its cover are waterproof, but not acid-proof or fireproof. Don’t

touch with these materials or they will ruin the camera head’s protective plastic. Avoid immersing the camera head into corrosive, oily

places or high-temperature objects.

e) Don’t place the inspection into anything or anywhere that may contain a live electrical charge. Please check following methods to

avoid injury.

For walls: For inspecting the inside walls, be sure to shut off the circuit breaker to the whole house before using the tool.

For pipes: If you suspect a metal pipe could contain an electrical charge, have a qualified electrician to check the pipe before using. A

ground circuit, in some cases, can be returned to the cast aluminum pipes and cause them to be charged.

For automobiles: Be sure the automobile is not running during inspection. Metal and liquid under the hood may be hot. Don’t get oil

or gas on the camera head.

Operation Notes

●Please read the manual thoroughly and make sure proper training has been complete before operating this product.

●The product can display real time battery capacity and “Low battery” will flash when battery is low, eventually the product will power

off itself.

●When using rechargeable KR6 batteries, a full battery status will not be detected by the product because the voltage of KR6 batteries

is different from battery rated voltage.

●Do not remove SD card during recording and USB connection mode.

●Don’t immerse the inspection into water, which will result in electric shock and damage.