Netis WF2501 [38/62] Wireless access

150/300Mbps Wireless-N Long Distance Broadband RouterUser Manual

you set is not in accord with the value ISP provide, it may causes some problems, such as

fail to send Email, or fail to browse website. So if that happen, you can contact your ISP for

more information and correct your router’s MTU value.

 Primary DNS:The DNS server translates domain or website names into IP address, input

the most common DNS server address you used or provided by your ISP.

 Secondary DNS: Input IP address of a backup DNS server or you can leave this field

blank.

4.4.1.2. Wireless Access

Figure 4-19

 SSID: SSID: SSID (Service Set Identifier) is your wireless network's name shared among

all points in a wireless network. The SSID must be identical for all devices in the wireless

network. It is case-sensitive and must not exceed 32 characters. Make sure all points in the

wireless network have the same SSID. For added security, you should change the default

SSID to a unique name.

 Authentication Type: “None” means do not encrypt wireless data.

 Internet Access Type: Ask for your ISP to get the correct access type.

 IP: The IP address you obtained after connect to the Internet, if you haven’t connected to

the Internet yet, this field is 0.0.0.0.

 Subnet Mask: The Subnet mask you obtained after connect to the Internet, if you haven’t

connected to Internet yet, this field is 0.0.0.0.

 Gateway: The IP address of Default gateway you obtained after connect to the Internet, if

you haven’t connected to Internet yet, this field is 0.0.0.0.

 MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size

permitted for network transmission. Most DSL users should use the value 1492.You can

set MTU manually, and you should leave this value in the 1200 to 1500 range. If the value

you set is not in accord with the value ISP provide, it may causes some problems, such as