Legrand TRIMOD HE 15 kVA [13/14] Technical specifications
![Legrand TRIMOD HE 15 kVA [13/14] Technical specifications](/views2/1165524/page13/bgd.png)
13 di 14
6 Technical specifications
item
data
6.1 General Specifications
UPS Topology
On line double conversion VFI SS 111
Architectiure of the UPS
Modular,scalable, redundant based on 5kVA Power Modules
In/Out phase Configuration
Three phase-Three phase
Neutral
Neutral Passing through
Output wave form on mains run
Sinusoidal
Output wave form on battery run
Sinusoidal
Bypass type
Static and elettromechanic
Transfer time
Zero
6.2 Input
Nominal Voltage
400 V three phase / 230V single phase
Voltage range
-20% +15%
Frequency
50 Hz o 60Hz
(autosensing)
THDI
in
< 3% al 100% of nominal load
Power Factor
> 0.99 from 50% to 100% of nominal load
6.3 Output with mains (AC-AC)
Nominal voltage
400 V three phase / 230V single phase
Nominal power
15.000 VA
Active power
15.000 W
AC-AC Efficiency (On Line)
up to 96%
Voltage variation (static)
± 1%
Voltage variation (dynamic 0-100%; 100-0%)
± 1%
THDv on nominal power (linear load)
< 0,5 %
THDv on nominal power (not linear load P.F.=0,7)
< 1 %
Frequency
50 Hz o 60 Hz (autosensing or selectable)
Frequency tolerance
Synchronized with input frequency or
± 1% free run
Current Crest Factor
3:1 accordingly with IEC 62040-3
Overload capability:
• 10 min
• 1 min
115% load rate with no bypass intervention
135% load rate with no bypass intervention
6.4 Output in battery Run (DC-AC)
Nominal voltage
400 V three phase / 230V single phase
Nominal power
15.000 VA
Active power
15.000 W
DC-AC Efficiency
up to 96%
Voltage variation (static)
± 1%
Voltage variation (dynamic 0-100%; 100-0%)
± 1%
THDv on nominal power (linear load)
< 0,5 %
THDv on nominal power (not linear load P.F.=0,7)
< 1 %
Frequency
50 Hz o 60 Hz (autosensing or selectable)
Frequency tolerance
± 1% free run
Current Crest Factor
3:1 accordingly with IEC 62 040-3
Overload capability:
• 2 min
• 30 sec
115% load rate with no bypass intervention
135% load rate with no bypass intervention
Содержание
- For three phase ups on line double conversion vfi 1
- Kva 15 kw 1
- Tender technical specification 1
- Description of the system 6 2
- General requirements 4 2
- Generali specifications 4 2
- Operating principle 8 2
- Control panel and display 10 3
- Reference standards 14 3
- Technical specifications 13 3
- General requirements 4
- Generali specifications 4
- X n p p 5
- Description of the system 6
- Bypass activation sensitivity adjustment 8
- Inverter stopping 8
- Normal service condition 8
- Operating principle 8
- Overload 8
- After a blackout 9
- Inverter stopping in a power module 9
- Maintenance bypass 9
- Start up on bypass 9
- Asynchronous operation 10
- Control panel and display 10
- Frequency converter 10
- Genset 10
- Operation with a genset or as a frequency converter 10
- Adjustments 11
- Buzzer silencer 11
- Controls 11
- Functions and quitting 11
- Keyboard to browse the menus on the display set parameters confirming the selected 11
- Measurements 11
- Shutdown in an emergency the button must remain depressed for at least 3 seconds 11
- Signals and alarms 11
- The ups can manage the following measurements and show the relevant values on the display 11
- The ups has the following controls 11
- The ups must be equipped with a lighted operating status indicator with traffic light coding not smaller that 600x300 mm as well as a buzzer able to immediately indicate the following operating conditions 11
- The will ups allow the following adjustments to be made and shown on the display 11
- Ups secure powering protection against accidental powering 11
- Ups stopping to prevent accidental power offs while allowing the ups to be quickly 11
- E p o emergency power off 12
- Interfaces 12
- Miscellaneous equipment 12
- Rs232 serial port 12
- General specifications 13
- Item data 13
- Output in battery run dc ac 13
- Output with mains ac ac 13
- Technical specifications 13
- En 62040 1 general and safety requirements for ups used in operator access areas 14
- En 62040 2 electromagnetic compatibility requirements emc 14
- En 62040 3 performance requirements and test methods 14
- Reference standards 14
- The static uninterruptible power system must be designed and produced in compliance with the following international standards 14
- The ups manifacturer company must have iso9001 certification for development production and services 14
- The ups must have ce marking in accordance with european directives 73 23 93 68 89 336 92 31 the ups must have ce marking in accordance with european directives 73 23 93 68 89 336 92 31 93 68 14
Похожие устройства
- Legrand TRIMOD HE 20 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 20 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 20 kVA Технические характеристики
- Legrand TRIMOD HE 30 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 30 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 30 kVA Технические характеристики
- Legrand TRIMOD HE 40 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 40 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 40 kVA Технические характеристики
- Legrand TRIMOD HE 60 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 60 kVA Инструкция по эксплуатации
- Legrand TRIMOD HE 60 kVA Технические характеристики
- Legrand ARCHIMOD HE 20 kVA Инструкция по эксплуатации
- Legrand ARCHIMOD HE 20 kVA Инструкция по эксплуатации
- Legrand ARCHIMOD HE 20 kVA Технические характеристики
- Legrand ARCHIMOD HE 40 kVA Инструкция по эксплуатации
- Legrand ARCHIMOD HE 40 kVA Инструкция по эксплуатации
- Legrand ARCHIMOD HE 40 kVA Технические характеристики
- Legrand ARCHIMOD HE 60 kVA Инструкция по эксплуатации
- Legrand ARCHIMOD HE 60 kVA Инструкция по эксплуатации