D-Link dgs-1024d/f2a [6/33] Safety instructions continued
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link dgs-1024d/f2a [6/33] Safety instructions continued

D-Link dgs-1024d/g [6/33] Safety instructions continued
D-Link DGS-1016D/DGS-1024D Unmanaged Gigabit Ethernet Switch
vi
ension cable,
d 80 percent of the ampere ratings limit for the extension cable
Whe
offered r system, observe the following guidelines:
to the power
–
s.
Move products with care; ensure that all casters and/or stabilizers are firmly
neven surfaces.
Safety Instructions (continued)
To help avoid damaging your system, be sure the voltage selection Switch (if
provided) on the power supply is set to match the power available at your
location:
– 115 volts (V)/60 hertz (Hz) in most of North and South America and
some Far Eastern countries such as South Korea and Taiwan
– 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan.
– 230 V/50 Hz in most of Europe, the Middle East, and the Far East.
Also be sure that attached devices are electrically rated to operate with the
power available in your location.
Use only approved power cable(s). If you have not been provided with a power
cable for your system or for any AC-powered option intended for your system,
purchase a power cable that is approved for use in your country. The power
cable must be rated for the product and for the voltage and current marked on
the product's electrical ratings label. The voltage and current rating of the cable
should be greater than the ratings marked on the product.
To help prevent an electric shock, plug the system and peripheral power cables
into properly grounded electrical outlets. These cables are equipped with three-
prong plugs to help ensure proper grounding. Do not use adapter plugs or
remove the grounding prong from a cable. If you must use an ext
use a 3-wire cable with properly grounded plugs.
Observe extension cable and power strip ratings. Make sure that the total
ampere rating of all products plugged into the extension cable or power strip
does not excee
or power strip.
To help protect your system from sudden, transient increases and decreases in
electrical power, use a surge suppressor, line conditioner, or uninterruptible
power supply (UPS).
Position system cables and power cables carefully; route cables so that they
cannot be stepped on or tripped over. Be sure that nothing rests on any cables.
Do not modify power cables or plugs. Consult a licensed electrician or your
power company for site modifications. Always follow your local/national wiring
rules.
n connecting or disconnecting power to hot-pluggable power supplies, if
with you
– Install the power supply before connecting the power cable
supply.
Unplug the power cable before removing the power supply.
– If the system has multiple sources of power, disconnect power from the
system by unplugging all power cables from the power supplie
connected to the
system. Avoid sudden stops and u

Содержание

Похожие устройства

Скачать