D-Link DMC-1000 [11/14] If the chassis system needs to work alone you can stick up four rubber foot below the chassis

Step 1: Connect the supplied AC power cord to the back of the chassis.

Step 2: Attach the plug into a standard AC outlet with a voltage range from

100~240Vac.

Step 3: Turn on the chassis system by flipping the switch beside the receptacle to

ON position. The LED on the front panel of power supply will come on

then.

.Installing and Removing the Power Supply

z To remove a power supply out the chassis, you have to loose the hand screw

counter clockwise and pull out the power supply from the chassis.

z To install a power supply to the chassis, you have to fasten the hand screw

clockwise and slide in the power supply to the chassis.

You can slide in and out the power supply from the bay,

fasten or loose the hand screw clockwise or counter

clockwise by using hand or screwdriver.

If the Chassis System needs to work alone, you can

stick up four Rubber foot below the chassis!

Attention!