Landmann 12754 [21/32] Connecting and disconnecting the gas cylinder

GRILLCHEF

Connecting and disconnecting the gas cylinder

Parts and tools needed

• 17 mm spanner (open-ended spanner SW 17)

• Gas cylinder

A common camping gas cylinder with a ll weight of 3, 5 or 11 kg (e.g. grey camping propane gas cylinder). These are

available at DIY shops or liquid gas suppliers.

• Pressure regulator

Preset and

-approved pressure regulator, max. 1.5 kg/h, operating pressure 28-30 mbar at butane, 37 mbar at pro-

pane, suitable for the gas cylinder used. This type of pressure reducer is also available from your local dealer.

• Leak detector

You can locate any leaks in the gas system using a leak detector. This can be purchased at DIY shops or liquid gas sup-

pliers. Please follow the operating instructions of the leak detector.

The following part is included in delivery. It corresponds to the standards applicable in the country to which it has been

supplied by LANDMANN.

• Gas hose

-approved hose of sucient length; not exceeding 1.5m, allowing installation without any kinks.

Connecting the Gas Cylinder

Danger "Ignition of escaping gas"

Liquid gas is highly ammable and explosive.

Possible consequences:

• Serious personal injury or damage to property if escaping gas ignites in an environment

in which it is not controlled.

Safety precautions:

• When connecting the gas cylinder ensure that there are no sources of ignition within a

5 m radius.

• Take special care not to light any naked ames, do not smoke or switch on electric appli-

ances (devices, lights, door bells), etc. (sparkover possible).

• If necessary, replace the hose in order to comply with the corresponding national requi-

rements.

1. Select a suitable place to set up the cooker. Make sure that ...

– no ammable materials or substances are in close proximity to the cooker. Minimum distance to ammable mate-

rials or substances: 2m above and 1m to the side; distance to ame resistant materials or substances - min 0.25 m.

– the cooker is positioned rmly on a at, suciently large surface area. It must not be moved during operation.