Landmann 12754 [24/32] Starting up the sideburner

GRILLCHEF

clicking sound is heard), this will light the middle hand burner via the pilot. If not, repeat this process.

6. When middle hand burner is lit, turn the other burner control buttons like step 5. Ignition is made by the middle burner

part.

7. In case of failure turn burner control to l (O) and wait approx. 5 minutes. Repeat step 5.

8. Press and turn the left ame regulator (B) to "large ame" and keep it depressed until the left of the burner ignites.

9. Press and turn the right ame regulator (B) to "large ame" and keep it depressed until the right side of the burner

ignites.

10. Allow the burner to heat up at full power.

The rst time it is used, the burner should be heated at full power without any food for approximately 20 minutes to

allow the food-safe coating to harden (as is the case with any oven).

11. When the burner has heated up suciently turn the ame regulator (B) to the desired setting (size of ame).

12. You can now place the food on the roasting tray (2). We recommend that you wear barbecue gloves or similar for pro-

tection against the heat.

Replacement of a cylinder

Make Sure that:

– all Taps on the Gas consuming appliance in the „o“ position.

– the „Compact Quick-on“ regulator handle (5) is in the „o“ position.

Then, dismount the „Compact Quick-on“ by pressing horizontally on the handle (5) and pulling upwards at the Same time

(gur No. 4). Do not move thecylinder during operation.

Starting up the sideburner

1. Turn the control knob clockwise to ”OFF” position and open gas bottle valve according to the instruction before.

2. Push down the control knob and keep pressing whilst turning anti-clockwise to the ”MAX” position (a clicking sound is

heard), this will light the burner via the pilot. If not, repeat this process.

3. In case of failure turn burner control to l (O) and wait approx. 5 minutes. Repeat step 2.

4. Adjust burner control to appropriate setting.

Switching o the barbecue

1. Close the cylinder valve on the gas cylinder (turn 1 clockwise).

2. Turn the ame regulator (B) to "•" (o).

3. Wait until all of the parts have cooled down and then clean any soiled components.

4. Close the lid.

5. If the barbecue is not going to be used for a prolonged period:

– Disconnect the gas cylinder (see chapter "Disconnecting the gas cylinder").

– Store the barbecue in a dry place.