![Makita 4351FCT [8/32] Use clamps or another practical way to secure and support the workpiece to a stable platform](/img/pdf.png)
Makita 4351FCT [8/32] Use clamps or another practical way to secure and support the workpiece to a stable platform
8
12. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
13. Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
14. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
15. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust-related hazards.
Power tool use and care
16. Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
17. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
18. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
19. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
20. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
21. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
22. Use the power tool, accessories and tool bits
etc. in accordance with these instructions and in
the manner intended for the particular type of
power tool, taking into account the working con-
ditions and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Service
23. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
24. Follow instruction for lubricating and changing
accessories.
25. Keep handles dry, clean and free from oil and
grease.
SPECIFIC SAFETY RULES
GEB016-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the
operator.
2. Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
Holding the work by hand or against your
body leaves it unstable and may lead to loss of con-
trol.
3. Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
7. Hold the tool firmly.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the
tool only when hand-held.
11. Always switch off and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
12. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
13. Do not operate the tool at no-load unneces-
sarily.
14. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material sup-
plier safety data.
15. Always use the correct dust mask/respirator
for the material and application you are work-
ing with.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Содержание
- Symbole 6
- Symbols 6
- Символы 6
- English 7
- Explanation of general view 7
- General safety rules 7
- Save these instructions 7
- Specifications 7
- Always use safety glasses or goggles ordi nary eye or sun glasses are not safety glasses 4 avoid cutting nails inspect workpiece for any nails and remove them before operation 5 do not cut oversize workpiece 6 check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor workbench etc 7 hold the tool firmly 8 make sure the blade is not contacting the workpiece before the switch is turned on 9 keep hands away from moving parts 10 do not leave the tool running operate the tool only when hand held 11 always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece 12 do not touch the blade or the workpiece immediately after operation they may be extremely hot and could burn your skin 13 do not operate the tool at no load unneces sarily 14 some material contains chemicals which may be toxic take caution to prevent dust inhala tion and skin contact follow material sup plier safety data 15 always 8
- Do not let comfort or familiarity with product gained from repeated use replace strict adher ence to jig saw safety rules if you use this tool unsafely or incorrectly you can suffer serious personal injury 1 hold power tools by insulated gripping sur faces when performing an operation where the cutting tool may contact hidden wiring or its own cord 8
- Save these instructions 8
- Specific safety rules 8
- Use clamps or another practical way to secure and support the workpiece to a stable platform 8
- Warning misuse or failure to follow the safety rules stated in this instruction manual may cause serious personal injury 8
- Assembly 9
- For 4351fct only 9
- Functional description 9
- Installing or removing saw blade fig 4 5 6 9
- Lighting up the lamps 9
- Selecting the cutting action fig 1 9
- Speed adjusting dial fig 3 9
- Switch action fig 2 9
- Bevel cutting 10
- Circular cuts fig 21 22 10
- Cutouts 10
- Dust extraction 10
- Finishing edges fig 15 10
- Front flush cuts fig 12 10
- Hex wrench storage fig 7 10
- Metal cutting 10
- Operation 10
- Rip fence set optional accessory 10
- Straight cuts fig 19 20 10
- Accessories 11
- Anti splintering device fig 27 11
- Ce 2006 11
- Cover plate fig 26 11
- Ct 4351fct 11
- Ec declaration of conformity 11
- For european countries only 11
- For model 4351ct 4351fct 11
- For model 4351t 11
- Guide rail adapter set accessory 11
- Maintenance 11
- Allgemeine sicherheitsregeln 12
- Deutsch 12
- Diese anweisungen aufbewahren 12
- Technische daten 12
- Übersicht 12
- Spezielle sicherheitsregeln 13
- Bewahren sie diese hinweise sorgfältig auf 14
- Funktionsbeschreibung 14
- Hubzahl stellrad abb 3 14
- Schalterfunktion abb 2 14
- Wahl der schnittbewegung abb 1 14
- Ausschnitte 15
- Betrieb 15
- Einschalten der lampen 15
- Gehrungsschnitte 15
- Inbusschlüssel aufbewahrung abb 7 15
- Montage 15
- Montage demontage des sägeblatts abb 4 5 u 6 15
- Randnahe schnitte abb 12 15
- Bearbeitung von kanten abb 15 16
- Führungsanschlagsatz zubehör 16
- Parallelanschlagsatz sonderzubehör 16
- Schneiden von metall 16
- Staubabsaugung 16
- Wartung 16
- Ce 2006 17
- Ce konformitätserklärung 17
- Nur für europäische länder 17
- Zubehör 17
- Dane techniczne 18
- Ogólne zasady bezpieczeństwa 18
- Polski 18
- Wyjaśnienia dotyczące urządzenia i jego użycia 18
- Zachowaj tę instrukcję 18
- Szczegółowe zasady bezpieczeństwa 19
- Działanie włącznika rys 2 20
- Opis działania 20
- Pokrętło regulacji prędkości rys 3 20
- Wybór sposobu cięcia rys 1 20
- Zachowaj tę instrukcję 20
- Zawsze używaj maski przeciwpyłowej respiratora właściwego dla obrabianego materiału i wykonywanej pracy 20
- Cięcie ukośne 21
- Postępowanie 21
- Przechowywanie klucza sześciokątnego rys 7 21
- Składanie 21
- Wycięcia 21
- Zakładanie lub wyjmowanie brzeszczotu rys 4 5 i 6 21
- Zapalanie lampek 21
- Cięcie metalu 22
- Konserwacja 22
- Płyta ochronna rys 26 22
- Urządzenie antyodpryskowe rys 27 22
- Wykańczanie brzegów rys 5 22
- Zestaw adaptora prowadnicy wyposażenie 22
- Zestaw prowadnicy wyposażenie dodatkowe 22
- Ce 2006 23
- Drgania 23
- Model 4351ct 4351fct 23
- Model 4351t 23
- Szummy 23
- Tylko dla krajów europejskich 23
- Ue deklaracja zgodności 23
- Wyposażenie 23
- Алюмини 24
- Общие правила безопасности 24
- Русский язык 24
- Сохраните эту инструкцию 24
- Технические характеристики 24
- Описание функционирования 26
- Особые правила безопасности 26
- Сохраните эти инструкции 26
- Высвечивание ламп 27
- Действия при переключении рис 2 27
- Регулятор переключения скорости рис 3 27
- Сборка 27
- Установка или удаление лезвия пилы рис 4 5 и 6 27
- Вырезание 28
- Извлечение пыли 28
- Наклонная резка 28
- Отделка краев рис 15 28
- Передние разрезы вровень рис 12 28
- Резка металла 28
- Хранение торцевого гаечного ключа рис 7 28
- Эксплуатация 28
- Ехническое обслуживание 29
- Набор направляющего держателя принадлежность 29
- Принадлежности 29
- Противорасщепляющее устройство рис 27 29
- Стыковочная накладка рис 26 29
- Установка направляющей планки дополнительная принадлежность 29
- Ce 2006 30
- Ес декларация соответствия 30
- Модель 4351ct 4351fct 30
- Модель 4351t 30
Похожие устройства
- Makita 4351CT Инструкция по эксплуатации
- Makita 4350CT Инструкция по эксплуатации
- Makita 4329 Инструкция по эксплуатации
- Makita 4327 Инструкция по эксплуатации
- Makita 4326 Инструкция по эксплуатации
- Makita HP1641F Инструкция по эксплуатации
- Makita HP1640 Инструкция по эксплуатации
- Makita HP1640K Инструкция по эксплуатации
- Makita 6347DWAE Инструкция по эксплуатации
- Makita DF330DWLE Инструкция по эксплуатации
- Makita 6337DWDE Инструкция по эксплуатации
- Makita 6337DWAE Инструкция по эксплуатации
- Makita 6281DWPLE Инструкция по эксплуатации
- Makita 8281DWPE Инструкция по эксплуатации
- Makita 6281DWPE Инструкция по эксплуатации
- Makita 6271DWPE Инструкция по эксплуатации
- Makita 6271DWALE Инструкция по эксплуатации
- Makita 6271DWAE Инструкция по эксплуатации
- Makita 6261DWPE Инструкция по эксплуатации
- Perfeo PF-168-3-OUT Инструкция по эксплуатации
Скачать
Случайные обсуждения