Medela sns имитация грудного вскармливания [12/220] Cleaning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Medela sns имитация грудного вскармливания [12/220] Cleaning

Medela sns имитация грудного вскармливания [12/220] Cleaning
12
5.2.1 Before using for the rst time
I Disassemble* the SNS into its
single parts.
I Rinse all parts with water.
I Fill the bottle with 50 ml of water.
Screw the attachment ring with
the tubing onto the bottle.* Shake
the bottle for 5 seconds, then
squeeze it for 15 seconds to force
the water through the tubing.
I Remove the valve and tubing
from the ring.* Wrap all parts in
a sterilisable pouch. Sterilise all
parts by autoclaving at 134 °C
for 3 minutes or according to the
internal hygiene guidelines.
5.2.2 After each use
See chapter 5.1.2. (on page 11).
5.2.3 Once a day
You must sterilise the SNS once a
day by autoclaving. This is usually
done when you change the tubing.
5.2 Cleaning in the hospital
I Clean all parts immediately after
use to avoid drying up of milk
residues and to prevent growth of
bacteria.
l Only use drinking-quality water
for cleaning.
I To avoid cross-contamination,
replace the tubing/valve set by a
new set every 24 hours. Clean the
newly assembled SNS as
described in chapter 5.2.1.
I When you are cleaning the SNS,
check all parts for damage.
Throw away at rst signs of
damage or weakness. Replace
the damaged part by a new part
and clean the SNS as described
in chapter 5.2.1.
Caution
i
I Do not leave (parts of) the SNS in
direct sunlight or heat, as this may
weaken the parts.
Note
* For more information about assembling and disassembling the SNS, see chapter 6 and 8, respectively.
5. Cleaning

Содержание

Похожие устройства

Скачать