Nokia bh-220 luna (nfc) black, черный [4/9] Switch the headset on or off

When the battery charge is low, you hear a voice prompt. In addition, a red indicator

light flashes and the headset beeps every 5 minutes. If you have deactivated voice

prompts, the headset beeps every 5 minutes.

Check the battery charge

With your headset switched on and connected to your phone, press the multifunction

key. A green light indicates a sufficient charge level. If the light is yellow, you may need

to recharge the battery soon. If the light is red, recharge the battery.

Switch the headset on or off

Switch on

Press the headset down to remove it from the cradle. The headset switches on, and a

green indicator light flashes once.

The headset connects to the last connected phone. If you have never paired the headset

with a phone, or you have cleared the pairings, pairing mode is activated.

Switch off

Place the headset in the cradle, and press down on the headset to lock it into place. The

headset switches off, and a red indicator light flashes once. All active calls and

connections are ended.

If not connected to a phone within 30 minutes, the headset switches off.

Tip: Don't have the cradle with you? To switch the headset off, press and hold the

multifunction key for 5 seconds. To switch the headset on, press the multifunction key.

Wear the headset

The headset comes with different sized earpads. Select the earpad that fits the best and

is the most comfortable for your ear. To change the earpad, gently pull the current

earpad from the earpiece, and push the new earpad into place.

Gently push the earpiece into your ear.

When you're not using your headset, keep it in the cradle. You can thread a wrist strap

through the holes in the cradle, and carry it with you easily.

Pair the device

Pair and connect the headset to your phone

Before using the headset, you must pair and connect it to a compatible phone.