Nokia bh-220 luna (nfc) black, черный [8/9] Clear the pairings

Clear the pairings

1 To switch the headset off, press and hold the multifunction key for 5 seconds.

2 Press and hold the multifunction key for 9 seconds. The headset beeps twice, and

the red and green indicator lights alternate.

3 When the headset switches on, pairing mode is activated. Follow the voice prompts.

Product and safety information

Battery and charger information

This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you

may damage the device.

This device is intended for use when supplied with power from the following chargers: AC-16. The exact charger model number

may vary depending on the type of plug. The plug variant is identified by one of the following: E, X, AR, U, A, C, K, or B.

The battery can be charged and discharged hundreds of times, but it will eventually wear out.

Talk and standby times are estimates only. Actual times are affected by, for example, device settings, features being used,

battery condition, and temperature.

If the battery has not been used for a long time, to begin charging, you may need to connect the charger, then disconnect and

reconnect it.

If the battery is completely discharged, it may take several minutes before the charging indicator is displayed.

When your charger is not in use, unplug it from the electrical plug and the device. Do not leave a fully charged battery connected

to a charger, as overcharging may shorten the battery’s lifetime. If left unused, a fully charged battery will lose its charge over

time.

Always keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the

battery. A device with a hot or cold battery may not work temporarily.

Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Recycle when

possible. Do not dispose as household waste.

Use the charger for its intended purpose only. Improper use or use of unapproved chargers may present a risk of fire, explosion,

or other hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a service centre

for inspection before continuing to use it. Never use a damaged charger. Only use the charger indoors.

Take care of your device

Handle your device, battery, charger and accessories with care. The following suggestions help you protect your warranty

coverage.

Handle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode

electronic circuits. If your device gets wet, allow the device to dry.

• Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged.

• Do not store the device in high temperatures. High temperatures can shorten the life of the device, damage the battery,

and warp or melt plastics.