Home
Главная
Philips
Паровая Станция
gc 7035/20
Инструкция по эксплуатации Страница: 8

Philips gc 7035/20 [8/104] English

1 You can deactivate the ECO mode by pressing the ECO button. The green light goes

off (Fig. 16).

For the shortest ironing time, we advise you to switch off the ECO mode.

Safety auto-off (specic types only)

The safety auto-off function automatically switches off the appliance if it has not been used for

5 minutes, to save energy.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance.

If you are unable to solve the problem with the information below, visit www.philips.com/support

for a list of frequently asked questions or contact the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron does not

produce any steam.

There is not enough water in

the water tank.

Fill the water tank beyond the MIN

indication. Press and hold the steam trigger

until steam comes out. It may take up to

30 seconds until steam comes out.

You have not pressed the

steam trigger.

Press and hold the steam trigger until

steam comes out.

The light of the

Calc-Clean button

ashes and/or the

appliance beeps.

This is the Calc-Clean

reminder.

Perform the Calc-Clean process within

1 hour after the Calc-Clean reminder is

given (see chapter ‘IMPORTANT - Cleaning

and maintenance’).

The light of the

Calc-Clean button

ashes and the

appliance beeps

every time I press

the steam trigger.

No steam comes

out of the soleplate.

You have not done or have

not completed the Calc-

Clean process.

Perform the Calc-Clean process to enable

the steam function again (see chapter

‘IMPORTANT - Cleaning and

maintenance’).

The appliance has

switched off.

The safety auto-off function

was activated. This happens

automatically when the steam

generator has not been used

for more than 5 minutes.

Set the on/off switch to ‘off’ position and

then to ‘on’ position.

The appliance

produces a loud

pumping sound.

The water tank is empty. Fill the water tank with water and press the

steam trigger until the pumping sound

becomes softer and steam comes out of

the soleplate.

Water droplets

come out of the

soleplate.

After the Calc-Clean process,

remaining water may drip out

of the soleplate.

Wipe the soleplate dry with a piece of

cloth. If the light in the Calc-Clean button

still ashes and the appliance still beeps,

perform the Calc-Clean process (see

chapter ‘IMPORTANT - Cleaning and

maintenance’).

ENGLISH8

4239_000_9296_4_DFU-Booklet_A5_v1.indd 8 8/12/14 2:02 PM

Philips gc 7035/20 [8/104] English

Содержание

Похожие устройства