Ryobi eco2335hg (3000704) [4/100] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi eco2335hg (3000704) [4/100] English

Ryobi eco2335hg (3000704) [4/100] English
2
English
the spindle. Either of these situations could result in a
serious accident and can cause serious personal injury.
■ Do not remove the machine’s wheel guards. Never
operate the machine with any guard or cover removed.
Make sure all guards are operating properly before
each use.
■ Do not start your abrasive cut-off machine without
checking for interference between the wheel and the
machine base support. Damage may result to the wheel
if it strikes the machine base support during operation
of the machine.
■ Do not attempt to cut wood or masonry with this cut-
off machine. Never cut magnesium or magnesium alloy
with this machine.
■ Do not tighten wheel excessively, since this can cause
cracks.
■ Always ease the abrasive wheel against the work piece
when starting to cut. A harsh impact can break the
wheel.
■ Never cut more than one workpiece at a time. Do not
stack more than one workpiece on the machine base
at a time.
■ To minimize risk of tipping machine, always support
long workpieces.
■ Cutting steel will cause sparks. Do not operate in the
presence of combustible or flammable materials.
■ Never leave tool running unattended. Do not leave tool
until it comes to a complete stop.
■ Always release the power switch and allow the wheel
to stop rotating before raising it out of the workpiece.
■ Keep hands away from cutting area. Keep hands away
from wheel. Do not reach underneath work or around
or under the wheel while the wheel is rotating. Do not
attempt to remove cut material while wheel is moving.
■ Never stand or have any part of your body in line with
the path of the wheel.
■ Never stand on tool. Serious injury could occur if the
tool is tipped or if the wheel is unintentionally contacted.
■ Never perform any operation “freehand”. Always secure
the workpiece to be cut in the vice.
■ Never hand hold a workpiece. Workpiece will become
very hot while being cut.
INTENDED USE
■ Cutting all types of ferrous metals such as 50.8mm (2”)
x 152.4mm (6”) steel framing studs.
■ Cutting hard metal iron stock such as square bar stock
and angle iron.
■ Cutting metal tube and pipe stock.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety alert
CE Conformity
GOST-R Conformity
Please read the instructions carefully before
starting the product.
Class II, double insulated
Wear ear protection
Wear ear protection
Always wear eye protection.
Always wear eye protection.
DANGER! Sharp blade.
Not for wet grinding

Содержание

Похожие устройства

English the spindle Either of these situations could result in a serious accident and can cause serious personal injury ENVIRONMENTAL PROTECTION Do not remove the machine s wheel guards Never operate the machine with any guard or cover removed Make sure all guards are operating properly before each use Do not start your abrasive cut off machine without checking for interference between the wheel and the machine base support Damage may result to the wheel if it strikes the machine base support during operation of the machine Recycle raw materials instead of disposing of as waste The machine accessories and packaging should be sorted for environmental friendly recycling SYMBOL Safety alert Do not attempt to cut wood or masonry with this cut off machine Never cut magnesium or magnesium alloy with this machine Do not tighten wheel excessively since this can cause cracks Always ease the abrasive wheel against the work piece when starting to cut A harsh impact can break the wheel GOST R Conformity Never cut more than one workpiece at a time Do not stack more than one workpiece on the machine base at a time To minimize risk of tipping machine always support long workpieces Please read the instructions carefully before starting the product Cutting steel will cause sparks Do not operate in the presence of combustible or flammable materials Never leave tool running unattended Do not leave tool until it comes to a complete stop Always release the power switch and allow the wheel to stop rotating before raising it out of the workpiece Keep hands away from cutting area Keep hands away from wheel Do not reach underneath work or around or under the wheel while the wheel is rotating Do not attempt to remove cut material while wheel is moving Never stand or have any part of your body in line with the path of the wheel U Class II double insulated Wear ear protection Wear ear protection Never stand on tool Serious injury could occur if the tool is tipped or if the wheel is unintentionally contacted Never perform any operation freehand Always secure the workpiece to be cut in the vice Always wear eye protection Never hand hold a workpiece Workpiece will become very hot while being cut INTENDED USE Always wear eye protection Cutting all types of ferrous metals such as 50 8mm 2 x 152 4mm 6 steel framing studs Cutting hard metal iron stock such as square bar stock and angle iron DANGER Sharp blade Cutting metal tube and pipe stock Not for wet grinding

Скачать