CONEL SPECTRE v3 ERT [92/136] Configuration

Превью страниц Страница 92 / 136

4. CONFIGURATION

After you enter a phone number in the Phone Number 1 ﬁeld, the router allows you to

conﬁgure the control of the device using an SMS message. You can conﬁgure up to three

numbers for incoming SMS messages. To enable the function, mark the Enable remote control

via SMS check box. The default setting of the remote control function is active.

Item Description

Phone Number 1 Speciﬁes the ﬁrst phone number allowed to access the router us-

ing an SMS.

Phone Number 2 Speciﬁes the second phone number allowed to access the router

using an SMS.

Phone Number 3 Speciﬁes the third phone number allowed to access the router

using an SMS.

Table 57: Control via SMS

• If you leave the phone number ﬁeld blank, then you can restart the router using an

SMS Reboot message from any phone number.

• If you enter one or more phone numbers, then you can control the router using SMS

messages sent only from the speciﬁed phone numbers.

• If you enter the wild card character ∗, then you can control the router using SMS

messages sent from any phone number.

Control SMS messages do not change the router conﬁguration. For example, if the router is

changed to the off line mode using an SMS message, then the router remains in this mode.To

return the router to the on-line mode, reboot or power cycle the device. The behavior is the

same for every SMS control message.

To control the router using an SMS, send only message text containing the control com-

mand. You can send control SMS messages in the following form:

SMS Description

go online sim 1 The router changes to SIM1 (APN1)

go online sim 2 The router changes to SIM2 (APN2)

go online Changes the router to the online mode

go of ﬂine Changes the router to the off line mode

set out0=0 Sets the binary output to 0

set out0=1 Sets the binary output to 1

Continued on next page