CONEL SPECTRE v3 ERT — настройка SMS и AT-команд для маршрутизаторов [93/136]

Превью страниц Страница 93 / 136

4. CONFIGURATION

Continued from previous page

SMS Description

set proﬁle std Sets the standard proﬁle

set proﬁle alt1 Sets the alternative proﬁle 1

set proﬁle alt2 Sets the alternative proﬁle 2

set proﬁle alt3 Sets the alternative proﬁle 3

reboot The router reboots

get ip The router responds with the IP address of the SIM card

Table 58: Control SMS

Choosing Enable AT-SMS protocol on expansion port 1 and Baudrate makes it possible to

send/receive an SMS on the serial Port 1.

Item Description

Baudrate Communication speed on the expansion port 1

Table 59: Send SMS on the serial Port 1

Choosing Enable AT-SMS protocol on expansion port 2 and Baudrate makes it possible to

send/receive an SMS on the serial Port 2.

Item Description

Baudrate Communication speed on the expansion port 2

Table 60: Send SMS on the serial Port 2

Setting the parameters in the Enable AT-SMS protocol over TCP frame, you can enable

the router to send and receive SMS messages on a TCP port. This function requires you to

specify a TCP port number. The router sends SMS messages using a standard AT command.

Item Description

TCP Port TCP port on which will be allowed to send/receive SMS messages.

Table 61: Send SMS on ethernet PORT1 conﬁguration

4.19.1 Sending SMS

If you establish a connection to the router using a serial interface or Ethernet, then you can

use AT commands to manage SMS messages. The following table lists only the commands

that the router supports. For other AT commands the router sends an OK response. The

router sends an ERROR response for complex AT commands.