Graco IM5 239824 [4/14] Installation

Installation

4 308687J

Installation

The meters must be installed in-line as part of a dispense system as shown in Fig. 1. The typical installation shown is

only a guide for selecting and installing an in-line meter; it is not an actual system design. Contact your Graco distrib-

utor for assistance in designing a system to suit your needs.

Key:

A Shut-off valve

B Thermal relief valve (required; Part No. 235998) Install

downstream from the pump

C In-line filter

D In-line electronic meter

All electrical wiring must be done by a qualified elec-

trician and comply with all local codes and regula-

tions.

Do not use the IM5 In-line Electronic Meter in systems

where the operating pressure exceeds the maximum

pressure of the meter or any other component in the

system.

NOTICE

Do not use PTFE tape on threaded connections to

the meter. Such use could contribute to over-tighten-

ing of the parts and cause the meter housing to

crack. Standard pipe thread compound is recom-

mended.

FIG. 1