Graco IM5 239824 [6/14] Activation mode

Operation

6 308687J

Operation

Sleep Mode

The meter automatically shuts down the display after

one minute of non-use.

Activation Mode

There are two ways to activate the display:

• Press any button on the keypad to wake up the digi-

tal display. The amount displayed is the value stored

when the meter went into sleep mode.

• Dispense fluid through the meter to wake up the dig-

ital display. Dispensing fluid through the meter

causes the meter to count up from the last displayed

value. See Fig. 2.

Function of TOTAL

Press and hold the TOTAL key to see the accumulated

total of fluid dispensed through the meter.

The accumulated total is shown in gallons when the unit

of measurement is set in gallons, quarts, or pints. The

accumulated total is shown in liters when the measure-

ment is set in liters. The meter accumulates a running

total of up to 99,999 gallons (or liters) dispensed before

returning to zero. See Fig. 3.

Function of RESET

Press and hold the RESET key to clear the digital dis-

play after each dispense cycle.

NOTE: Always press the RESET key to clear the digital

display before each new dispense cycle.

For Maximum Dispensing Accuracy

Set the meter to dispense in pints or quarts when dis-

pensing 1 gallon (3.8 liters) or less.

Measurement Units

Fig. 4 shows the various measurement units as they

appear on the display.

FIG. 2: Example of Total for Last Dispense Cycle

FIG. 3: Example of Accumulated Total

FIG. 4: Example of Measurement Units