Moxa EDS-G508E [12/16] Attention

- 12 -

ATTENTION

This is a Class 1 Laser/LED product. To avoid causing serious

damage to your eyes, do not stare directly into the Laser Beam.

Reset Button

There are two functions available on the Reset Button. One is to reset the

Ethernet switch to factory default settings by pressing and holding the

Reset button for 5 seconds. Use a pointed object, such as a straightened

paper clip or toothpick, to depress the Reset button. This will cause the

STATE LED to blink once a second. After depressing the button for 5

continuous seconds, the STATE LED will start to blink rapidly. This

indicates that factory default settings have been loaded and you can

release the reset button.

When the ABC-02-USB is connected to the EDS-G500E Ethernet switch,

the reset button allows quick configuration and backs up log files to the

ABC-02-USB. Press the Reset button on top of the EDS-G500E, the

Ethernet switch will start backing up current system configuration files

and event logs to the ABC-02-USB.

NOTE

Do NOT power off the Ethernet switch when loading default

settings.

Turbo Ring DIP Switch Settings

EDS-G500E series are plug-and-play managed redundant Ethernet

switches. The proprietary Turbo Ring protocol was developed by Moxa to

provide better network reliability and faster recovery time. Moxa Turbo

Ring’s recovery time is less than 300 ms (Turbo Ring) or 50 ms (Turbo

Ring V2) —compared to a 3- to 5-minute recovery time for commercial

switches—decreasing the possible loss caused by network failures in an

industrial setting.

There are 4 Hardware DIP Switches for Turbo Ring on the top panel of

EDS-G500E series that can help setup the Turbo Ring easily within

seconds. If you do not want to use a hardware DIP switch to setup the

Turbo Ring, you can use a web browser, telnet, or console to disable this

function.

NOTE

Please refer to the Turbo Ring section in Communication

Redundancy

User's Manual for more detail information about

the setting and usage of Turbo Ring and Turbo Ring V2.

EDS-G500E Series DIP Switches

The default setting for each DIP Switch is OFF. The

following table explains the effect of setting the DIP

Switch to the ON position