Moxa DA-682A-C7-W7E [44/53] Step 6 reset the bios to its original state

DA-682A Win7 Software System Recovery

6-10

5. Now, Clonezilla will copy the system image you have configured on to your primary system drive. Your

original system (and any stored data or configurations that were made after the recovery disk was created)

will be entirely wiped clean. Wait for the process to finish; depending on the system, this should take about

10 minutes.

6. At this point, complete the restoration by selecting (0) Poweroff. This will shut down the computer;

however, if the Power Switch remains inserted in the front panel of the computer and is left in the ON

position, then the system will immediately initiate a soft reboot. To avoid this, users may use the switch to

cut power to the computer immediately following the shutdown, or may simply remove the power switch

from the front panel and then use the console to shut down the computer by pressing 0.

7. After the computer has powered down, remove the USB drive and store it in a safe place.

Step 6: Reset the BIOS to its Original State

Now you will need to return the boot priority to its original configuration so that the system will boot from the

original disk. This is done for two reasons; the first is security, so that the machine may not be rebooted from

unauthorized USB drives