![Moxa V2401-CE Руководство по программной части (Linux) онлайн [53/108] 170746](/img/pdf.png)
Moxa V2401-CE Руководство по программной части (Linux) онлайн [53/108] 170746
![Moxa V2401-CE Руководство по программной части (Linux) онлайн [53/108] 170746](/views2/1199425/page53/bg35.png)
V2401/2402 Series Linux User’s Manual Managing Communications
3-26
7. Set up DNS.
If you are using DNS servers supplied by your ISP, edit the file /etc/resolv.conf by adding the
following lines of code:
nameserver ip_addr_of_first_dns_server
nameserver ip_addr_of_second_dns_server
For example:
nameserver 168.95.1.1
nameserver 139.175.10.20
8. Use the following command to create a pppoe connection:
#pppd eth0
The ADSL modem is connected to the LAN1 port, which is named eth0. If the ADSL modem is
connected to LAN2, use eth1, etc.
9. Type #ifconfig ppp0 to check if the connection is OK. If the connection is OK, you should see
the IP address of ppp0. Use #ping to test the IP address.
10. If you want to disconnect it, use the kill command to kill the pppd process.
ppp0 Link encap Point-to-Point Protocol
inet addr 192.76.32.3 P-t-P 129.67.1.165 Mask
255.255.255.0
UP POINTOPOINT RUNNING MTU 1500 Metric 1
RX packets 33 errors 0 dropped 0 overrun 0
TX packets 42 errors 0 dropped 0 overrun 0
MOXA:/etc# cat resolv.conf
#
# resolv.conf This file is the resolver configuration file
# See resolver(5).
#
#nameserver 192.168.1.16
nameserver 168.95.1.1
nameserver 139.175.10.20
nameserver 140.115.1.31
nameserver 140.115.236.10
MOXA:/etc#
Содержание
- First edition march 2010 1
- V2401 2402 series linux user s manual 1
- Www moxa com product 1
- Copyright notice 2
- Disclaimer 2
- Technical support contact information 2
- Trademarks 2
- V2401 2402 series linux user s manual 2
- Www moxa com support 2
- Table of contents 3
- Introduction 5
- Device driver 6
- Hardware 6
- Linux kernel 6
- Micro kernel 6
- Overview 6
- Protocol stack 6
- Software specifications 6
- Software components 7
- Software configuration 8
- Starting from a vga console 9
- Desktop display configuration 10
- Connecting from a telnet console 14
- Connecting from an ssh console 15
- Windows users 15
- Adjusting the system time 16
- Linux users 16
- Setting the time manually 16
- Example shell script for updating the system time periodically 17
- Ntp client 17
- Updating the time automatically 17
- Enabling and disabling daemons 18
- How to run the shell script automatically when the kernel boots up 18
- Setting the run level 22
- Cron daemon for executing scheduled commands 23
- Inserting a usb storage device into the computer 24
- Apt installing and removing packages 25
- Checking the linux version 25
- Device suspend 27
- Managing communications 28
- Changing the interfaces configuration file 30
- Changing the network settings 30
- Static ip address 30
- Adjusting ip addresses with ifconfig 31
- Dynamic ip address using dhcp 31
- Serial port operation mode 31
- Disabling the telnet ftp server 32
- Enabling the telnet ftp server 32
- Telnet ftp server 32
- Dns client 33
- Etc hostname 33
- Etc nsswitch conf 34
- Etc resolv conf 34
- Apache web server 35
- Default homepage 35
- Disabling the cgi function 35
- Saving web pages to a usb storage device 36
- Filter table includes three chains 38
- Iptables 38
- Nat table includes three chains 38
- Process 38
- Mangle table includes two chains 39
- Sub tables 39
- 13 3 13 40
- Iptables hierarchy 40
- The following figure shows the iptables hierarchy 40
- V2401 2402 series linux user s manual managing communications 40
- Iptables modules 41
- Define policy for chain rules 42
- Observe and erase chain rules 42
- Append or delete rules 43
- Nat example 44
- Nat network address translation 44
- Enabling nat at bootup 45
- Connecting to a ppp server over a simple dial up connection 46
- Ppp point to point protocol 46
- Checking the connection 47
- Connecting to a ppp server over a hard wired link 47
- Setting up a machine for incoming ppp connections 49
- Nfs network file system client 54
- Snmp simple network management protocol 55
- Ethernet bridging for private networks on different subnets 56
- Openvpn 56
- Ethernet bridging for private networks on the same subnet 61
- Routed ip 62
- Programmer guide 64
- Device api 65
- Rtc real time clock 65
- Example to get the baudrate 66
- Example to set the baudrate 66
- Baudrate inaccuracy 67
- Digital i o 67
- Special note 67
- Dio program source code file example 69
- Examples 69
- Special note 69
- System recovery 74
- Recovery environment 75
- Recovery procedure 75
- In this example m is the usb disk drive number 76
- A software component list 84
- Software component list 84
Похожие устройства
- Moxa V2401-CE Технические характеристики
- Moxa V2401-CE Руководство по быстрой установке
- Moxa V2401-LX Инструкция по эксплуатации
- Moxa V2401-LX Руководство по программной части (Windows)
- Moxa V2401-LX Руководство по программной части (Linux)
- Moxa V2401-LX Руководство по быстрой установке
- Moxa V2401-LX Технические характеристики
- Moxa V2401-XPE Инструкция по эксплуатации
- Moxa V2401-XPE Руководство по программной части (Windows)
- Moxa V2401-XPE Руководство по программной части (Linux)
- Moxa V2401-XPE Руководство по быстрой установке
- Moxa V2401-XPE Технические характеристики
- Moxa V2402-CE Инструкция по эксплуатации
- Moxa V2402-CE Руководство по программной части (Windows)
- Moxa V2402-CE Руководство по программной части (Linux)
- Moxa V2402-CE Руководство по быстрой установке
- Moxa V2402-CE Технические характеристики
- Moxa V2402-LX Инструкция по эксплуатации
- Moxa V2402-LX Руководство по программной части (Windows)
- Moxa V2402-LX Руководство по программной части (Linux)