Escada ES-AS520A [11/27] Wall mounting

ES-AS520a

www.escada-electronics.ru

Wall mounting

The front, center and surround speakers include mount holes for wall mounting. You

can hang the front and surround speakers on the wall vertically, and the center

speaker horizontally. For vertical mount, you use only one screw and hang the

speaker from its upper mount hole only. For horizontal mount, you need to set two

screws into the wall at the appropriate distance so that you can hang the speaker

from both mount holes.

1. To drill a 6 to 7 mm diameter and 30 to 40 mm depth hole in the wall at the desired

location and fill the plastic stopper into the hole.

2. Screw a single screw into the plastic stopper. Screw it only part way in, so that the

screw projects 15 to 18 mm outward from the wall surface.

3. Hang the speaker by fitting the top mount hole (at the upper rear of the speaker)

over the extending part or the screw. Confirm that the speaker is held firmly and

securely in place.

Figure for front & rear speaker Figure for center speaker

Precautions

Please observe the following precautions when mounting speakers onto the wall.

Ø Be sure that the wall you are using is strong enough to support the full weight of the

speaker.

Ø If you are uncertain about the walls support strength, the type of screw to use, or

any other points regarding this type of installation, please consult a contractor or

other qualified person before proceeding.