Moxa ioLogik E1510-M12-T [28/62] To allow access to hosts on a specific subnet

ioLogik E1500 Series Using the Web Console

3-12

The Digital Output’s Alias Name and the logic definition can also be configured on this page. You can apply the

alias name to all channels by clicking the Apply to all DO channels box.

System Management

IP Accessibility

You can control network access to the ioLogik E1500 from the IP Accessibility page by only allowing access from

specific IP addresses. When the accessible IP list is enabled, a host’s IP address must be listed in order to gain

access to the ioLogik E1500.

Specify a range of addresses by using a combination of an IP address and netmask, as follows:

To allow access to a specific IP address

Enter the IP address in the corresponding field; enter 255.255.255.255 for the netmask.

To allow access to hosts on a specific subnet

For both the the IP address and netmask, use 0 for the last digit (e.g., 192.168.1.0 and 255.255.255.0).

To allow unrestricted access

Deselect the Enable the accessible IP list option.