Moxa ioLogik 2542-T [50/88] Profile settings

ioLogik 2500 Series Offline Configuration Management

4-25

Profile Settings

The selected data will be logged in a profile. The profile name will be used as the folder name on the

microSD card for storing logged data. The profile settings allow you to select the channel you want to log

and configure settings (e.g., Enable at power on and profile Size) for each profile.

The profile is saved to a folder based on the profile name. The filename is based on the creation time.

ftp://IP address of device : port/profile name/yyyy/mmddhhxx.csv

• yyyy: year

• mm: month

• dd: date

• hh: hour (24-hour clock)

• xx: sequence number (00 to 99)

Name

The profile name will also be used as the folder name on the microSD card for storing logged data.

Enable at Power On

Enable this function to start data logging at power on. You can also use ClicK&Go Plus rules to

enable/disable the logging features of each profile.

Total Profile Size

The Total Profile Size sets an upper limit on the amount of data that will be logged. When the limit is

reached, the newest data will overwrite the oldest data.

NOTE

The total size of the profiles should be less than the size of the microSD card. Otherwise, the data cannot be

logged

onto the microSD card. 1,000,000 records require about 1 MB of memory space.

Records per File

The Records per File setting sets an upper limit on the number of records allowed per file. When a particular

file reaches the maximum number of records, the device will create a new file in the same profile folder and

then continue to record data.

Select Tag

For a given profile, you can select which tags you would like to record.

Select Module

You can check ioLogik 2500 and its IO expansion module by using the select module function. If you select

ALL, all modules will be selected.

I/O Type

You can select the type of the data you would like to record. Types of data that can be recorded include DI,

Counter, DO, Pulse, AI, Internal Register, Virtual Channel, Serial Tag.

Select All/Unselect All

You can select all channels or unselect all channels with a single click.

Apply to All

You can apply one parameter to all channels. For example, you can change On Change from disable to

enable and then click Apply to All. The On Change enable setting will be applied to all AI channels.