Moxa ioLogik 2542-T [52/88] Click go plus tab

ioLogik 2500 Series Offline Configuration Management

4-27

Timeout (ms)

The ioLogik 2500 will disconnect the session when this timeout is reached (100 to 65535 ms; default =

1000).

FTP Server Settings

The device can be an FTP server for FTP clients to retrieve logged data. The logged file is read-only.

The address to access data will stored in the following address: ftp://IP address of device : port/profile

name/yyyy/mmddhhxx.csv

• yyyy: year

• mm: month

• dd: date

• hh: hour (24-hour clock)

• xx: sequence number (00 to 99)

Enable FTP server

To enable or disable the FTP server function.

Username

The FTP server’s username.

Password

The FTP server’s password.

NOTE

efault username: admin

efault password: moxa

Click&Go Plus

Click&Go Plus provides the functional elements that can be used in Click&Go Plus rules, including Timer,

SNMP trap, TCP/UDP message, Email, Schedule, Internal Register, Remote Action, and CGI command. You

must set all of these elements before you start configuring your Click&Go rules. When a set of rules (known

as a rule-set) is defined using Click&Go Plus, the ioLogik can perform local and remote I/O control, report

I/O status, and actively send out messages, e-mails, or SNMP traps to a host as soon as the user-defined

I/O conditions have been met.

For a detailed introduction on how to use this function, refer to Chapter 2 of the Click&Go Plus User’s

Manual.

Click&Go Plus Tab

Click&Go Plus logic provides an easy way to program your ioLogik 2500 product for smarter I/O

functionality over an Ethernet network. For a detailed introduction on how to use Click&Go Plus, refer to

Chapter 3 of the Click&Go Plus User’s Manual.