Moxa ioPAC 8020-5-M12-C-T [11/69] Analog input

Moxa ioPAC 8500-2-M12-C-T [11/69] Analog input
Moxa C Programmable RTU Controllers Introduction
1-7
LAN
Ethernet:
1 x 10/100 Mbps, RJ45
Protection:
1.5 KV magnetic isolation
Protocols:
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, SNTP
Serial Communication
Interface:
2 x RS-232/422/485, software selectable (9-pin D-Sub male)
Baudrate:
300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Inputs and Outputs
Analog Inputs:
4 channels
Configurable DIOs:
8 channels
Relay Outputs:
2 channels
Isolation:
3K VDC or 2K Vrms
Analog Input
Type:
Differential input
Resolution:
16 bits
I/O Mode:
Voltage / Current
Input Range:
0 to 10 V, ±10 V, ±5 V, 0 to 20 mA, 4 to 20 mA
Accuracy:
• ±0.1% FSR @ 25°C
• ±0.3% FSR @
-30 and 70°C
Sampling Rate:
W5348:
• All channels: 5 samples/sec
• Per channel: 1.25 samples/sec
Input
Impedance: 200K ohms (min.)
Built
-in Resistor for Current Input: 102 ohms
Digital Input
Sensor Type:
Wet Contact (NPN or PNP) and Dry Contact
I/O Mode:
DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact (DI to GND):
• On:
0 to 3 VDC
• Off: 10 to 30 VDC
Common Type:
4 points per COM
Counter Frequency:
25 Hz
Digital Filtering Time Interval:
Software selectable/Programmable
Digital Output
Type:
Sink
I/O Mode:
DO or Pulse Output
Pulse Output Frequency:
50 Hz
Over
-voltage Protection: 45 VDC
Over
-current Protection: 2.6 A (4 channels @ 650 mA)
Over
-temperature Shutdown: 160°C (min.)
Current Rating:
200 mA per channel
DIO Output Leakage Current:
3.6 mA @ 24 VDC

Содержание

Скачать