![Moxa OnCell 5004-HSPA [29/67] Background](/img/pdf.png)
Moxa OnCell 5004-HSPA [29/67] Background
![Moxa OnCell 5104-HSPA-T [29/67] Background](/views2/1201511/page29/bg1d.png)
OnCell 5000 Series Web Console Configuration
4-7
Background
1. “Register to network” and “Establish PPP with ISP” are two steps for establishing connection with the ISP.
2. If GuaranLink determines that the OnCell cannot establish connection with the ISP, it reboots the OnCell in
order to allow the OnCell to retry the connection once rebooted.
Common Settings
• GuaranLink (default=Disable): Enable this setting to start the GuaranLink function.
• Register to network timeout (min) (default=10): This setting is to specify how long GuaranLink
should wait to register to the network before the OnCell reboots itself.
• PPP retry count (default=3 mins) This setting is to specify how many times GuaranLink should retry to
establish PPP with the ISP before OnCell reboots itself.
• DNS/Ping remote host 1 and DNS/Ping remote host 2: This setting is for “Cellular connection alive
check” and “Packet-level connection check.” It specifies the target host of the DNS lookup and Ping
action. It could be either a domain name or an IP address.
GuaranLink Check Settings
• ISP initial connection check (default=Disable): This function is to ensure that the OnCell can establish
connection with an ISP after it reboots.
• Cellular connection alive check (default=Disable): Some ISPs may disable the connection if there is
no data transmitted in a specific period of time, depending on the ISP’s settings. This function ensures that
the cellular connection will be kept alive even if no data is transmitted for a period of time by performing the
check action of DNS lookup or ping action of DNS/Ping remote host 1 or DNS/Ping remote host 2. If the
check action fails after the retry count number specified in “Cellular connection alive check retry count”, the
OnCell will re-establish a connection with the ISP.
• Cellular connection alive check interval (min) (default=5 min): This setting specifies the idle time
before GuaranLink performs the check action.
• Cellular connection alive check retry count (default=3 sec): This setting specifies the number of
attempts to reach the remote target(s) before the OnCell re-establishes a connection.
• Packet-level connection check (default=Disable): This function checks if the cellular network can be
accessed by performing the check action of lookup DNS or ping action of DNS/Ping remote host 1 or
DNS/Ping remote host 2. If the check action fails after the retry count number specified in “Packet-level
connection check retry count.” the OnCell will re-establish a connection with ISP.
Содержание
- Edition 6 october 2016 1
- Oncell 5000 series user s manual 1
- Www moxa com product 1
- Copyright notice 2
- Disclaimer 2
- Oncell 5000 series user s manual 2
- Technical support contact information 2
- Trademarks 2
- Www moxa com support 2
- Table of contents 3
- Introduction 5
- Oncell 5000 series introduction 6
- Overview 6
- Package checklist 6
- Product features 6
- Oncell 5000 series introduction 7
- Product specifications 7
- Specification comparison chart 7
- Oncell 5000 series introduction 8
- Getting started 9
- Oncell 5000 series getting started 10
- Oncell 5004 hspa 10
- Panel layout 10
- Oncell 5000 series getting started 11
- Oncell 5104 hspa 11
- Connecting the hardware 12
- Din rail and rack mounting 12
- Din rail mounting 12
- Oncell 5000 series getting started 12
- Wall or cabinet mounting 12
- Connecting the i o port 13
- Connecting the power 13
- Connecting to the network 13
- Oncell 5000 series getting started 13
- Sim card installation 13
- Attention 14
- Led indicators 14
- Oncell 5000 series getting started 14
- Reset button 14
- Initial ip address configuration 15
- Attention 16
- Configuration options 16
- Factory default ip address 16
- Oncell 5000 series initial ip address configuration 16
- Oncell search utility 16
- Static and dynamic ip addresses 16
- Web console 16
- Attention 17
- Oncell 5000 series initial ip address configuration 17
- Telnet console 17
- Oncell 5000 series initial ip address configuration 18
- Oncell 5000 series initial ip address configuration 19
- Oncell 5000 series initial ip address configuration 20
- Serial console 20
- Oncell 5000 series initial ip address configuration 21
- Oncell 5000 series initial ip address configuration 22
- Web console configuration 23
- Accessing the web console 24
- Attention 24
- Oncell 5000 series web console configuration 24
- Web console navigation 24
- Attention 25
- Basic settings 25
- Device settings 25
- Oncell 5000 series web console configuration 25
- Time settings 25
- Lan settings 26
- Network settings 26
- Oncell 5000 series web console configuration 26
- Cellular wan settings 27
- Lan port configuration 27
- Oncell 5000 series web console configuration 27
- Guaranlink settings 28
- Oncell 5000 series web console configuration 28
- Overview 28
- Background 29
- Common settings 29
- Guaranlink check settings 29
- Oncell 5000 series web console configuration 29
- Ethernet wan settings 30
- Oncell 5000 series web console configuration 30
- Dns settings 31
- Oncell 5000 series web console configuration 31
- Auto ip report 32
- Dhcp settings 32
- Oncell 5000 series web console configuration 32
- Advanced network settings 33
- Firewall settings 33
- Oncell 5000 series web console configuration 33
- Oncell central manager 33
- Virtual server settings 33
- Oncell 5000 series web console configuration 34
- Wan ip filter 34
- Oncell 5000 series web console configuration 35
- Route table 35
- Vpn settings 35
- System management settings 36
- Misc network settings 37
- Oncell 5000 series system management settings 37
- Snmp agent settings 37
- Auto warning settings 38
- Ddns configuration 38
- Event settings 38
- Oncell 5000 series system management settings 38
- C wan x x x x c wan x x x x 39
- E mail alert 39
- E wan x x x x 39
- Modelname alert s n serial number lan lan ip lan mac address c wan e wan p wan wan ip yyyy mm dd hh mm ss message 39
- Oncell 5000 series system management settings 39
- Attention 40
- Oncell 5000 series system management settings 40
- Sms alert 40
- Snmp trap 40
- Console settings 41
- Maintenance 41
- Oncell 5000 series system management settings 41
- System log settings 41
- Configuration import export 42
- Firmware upgrade 42
- Oncell 5000 series system management settings 42
- Attention 43
- Change password 43
- Load factory defaults 43
- Oncell 5000 series system management settings 43
- Remote sms control 43
- Manual sms 44
- Oncell 5000 series system management settings 44
- Certificate 45
- Ethernet ssl certificate import 45
- Oncell 5000 series system management settings 45
- Ping test 45
- Certificate key delete 46
- Network connections 46
- Network statistics 46
- Oncell 5000 series system management settings 46
- Routing 46
- System monitoring 46
- Dhcp client list 47
- Dout state 47
- Internet sessions list 47
- Oncell 5000 series system management settings 47
- System log 47
- Din and power status 48
- Oncell 5000 series system management settings 48
- Restart 48
- Restart system 48
- Save configuration 48
- Introduction and configuring vpn 49
- Example gateway to gateway network topology 50
- Oncell 5000 series introduction and configuring vpn 50
- Oncell vpn specifications 50
- What are vpns 50
- Configuration 51
- Local network 51
- Manual key esp 51
- Oncell 5000 series introduction and configuring vpn 51
- Oncell vpn web console settings 51
- Remote network 51
- Incoming security settings 52
- Oncell 5000 series introduction and configuring vpn 52
- Outgoing security settings 52
- Configuration 53
- Isakmp psk 53
- Oncell 5000 series introduction and configuring vpn 53
- Remote network 53
- Advanced settings 54
- Isakmp key management 54
- Isakmp phase 1 54
- Isakmp phase 2 54
- Local identity 54
- Oncell 5000 series introduction and configuring vpn 54
- Oncell 5000 series introduction and configuring vpn 55
- Vpn system log events and error codes 55
- Oncell 5000 series introduction and configuring vpn 56
- Oncell central management software 56
- Oncell central serial device connection 56
- Oncell 5000 series introduction and configuring vpn 57
- Oncell central ethernet device connection 57
- Oncell search utility 58
- Installing the search utility 59
- Oncell 5000 series oncell search utility 59
- Configuring the oncell search utility 60
- Oncell 5000 series oncell search utility 60
- Oncell 5000 series oncell search utility 61
- Oncell 5000 series oncell search utility 62
- A default settings 63
- Default settings 63
- B dynamic domain name server 64
- Dynamic domain name server 64
- Overview 64
- Configuration 65
- Oncell 5000 series dynamic domain name server 65
- Auto ip report format 66
- Auto ip report protocol 66
- C auto ip report protocol 66
- Id list 66
- Info n 66
- Ap id hardware id mapping table 67
- Oncell 5000 series auto ip report protocol 67
Похожие устройства
- Moxa OnCell 5004-HSPA Руководство по программной части
- Moxa OnCell 5004-HSPA Технические характеристики
- Moxa OnCell 5004-HSPA Руководство по аппаратной части
- Orion DRL-12LED 36W Руководство по эксплуатации
- Moxa OnCell 5104-HSPA-T Инструкция по эксплуатации
- Moxa OnCell 5104-HSPA-T Руководство по программной части
- Moxa OnCell 5104-HSPA-T Технические характеристики
- Moxa OnCell 5104-HSPA-T Руководство по аппаратной части
- Orion FOG LIGHT 5W-40мм Руководство по эксплуатации
- Moxa OnCell 5104-HSPA Инструкция по эксплуатации
- Moxa OnCell 5104-HSPA Руководство по программной части
- Moxa OnCell 5104-HSPA Технические характеристики
- Moxa OnCell 5104-HSPA Руководство по аппаратной части
- Orion FOG LIGHT 10W-64мм Руководство по эксплуатации
- Moxa WDR-3124A-EU Инструкция по эксплуатации
- Moxa WDR-3124A-EU Руководство по подключению
- Moxa WDR-3124A-EU Технические характеристики
- Moxa WDR-3124A-EU-T Инструкция по эксплуатации
- Moxa WDR-3124A-EU-T Руководство по подключению
- Moxa WDR-3124A-EU-T Технические характеристики