![Moxa OnCell 5004-HSPA [39/67] E mail alert](/img/pdf.png)
Moxa OnCell 5004-HSPA [39/67] E mail alert
![Moxa OnCell 5104-HSPA-T [39/67] E mail alert](/views2/1201511/page39/bg27.png)
OnCell 5000 Series System Management Settings
5-4
NOTE
If you select “enable for SMS,” the receiver will receive the message in the following format:
[modelName] alert (S/N: [serial number], LAN: [LAN IP], [LAN MAC Address]):
(C
-WAN/E-WAN/P-WAN: [WAN IP]): (yyyy-mm-dd hh:mm:ss) [message]
C-WAN: x.x.x.x indicates the cellular WAN IP address
E-WAN: x.x.x.x indicates the Ethernet WAN IP address and “P-WAN: x.x.x.x” indicates the
preferred WAN IP address.
Cold start: This refers to starting the system from a power off state, or after upgrading the firmware
Warm start: This refers to restarting the OnCell 5000 without turning the power off.
Ethernet link down: These settings configure the OnCell 5000 to change the status of the relay output and
SMS if the specified connection goes down.
Console (web/text) login authentication failure: This field refers to failed attempts to log in to a
WEB/Console/Telnet/OnCell Central using a password.
IP changed: With this IP address change, the OnCell 5000 will send an email or SMS warning after it reboots.
Password changed: With this option selected, the OnCell 5000 will attempt to send an e-mail or SMS warning
after it reboots with a new console password. If the OnCell 5000 is unable to send an e-mail or SMS message
to the mail server within 15 seconds, it will still reboot without sending the e-mail or SMS.
Power event: The OnCell 5000 provides two DC power inputs for redundancy. If either power fails, the OnCell
5000 will attempt to send an e-mail warning, relay output, or SMS.
Din event: When the status of digital input 1 or 2 is changed, the OnCell 5104 series will attempt to send an
e-mail, trigger the digital output, or send an SMS.
Cell. module fail: When the cellular module fails to function, the OnCell 5000 will attempt to send an e-mail,
or trigger the digital output to inform users.
Cell. close temperature range: When the temperature on the cellular module inside the OnCell 5000 is close
to the upper or lower limit, the OnCell 5000 will attempt to send an e-mail, trigger the digital output, or send
an SMS message to inform users.
Cell. over temperature range: When the temperature on the cellular module inside the OnCell 5000 is
outside the normal temperature range, the OnCell 5000 will attempt to send an e-mail, or trigger the digital
output to inform users.
E-mail Alert
The E-mail Alert settings determine how e-mail warnings are sent for system and serial port events. You may
configure up to 4 e-mail addresses to receive automatic warnings.
Содержание
- Edition 6 october 2016 1
- Oncell 5000 series user s manual 1
- Www moxa com product 1
- Copyright notice 2
- Disclaimer 2
- Oncell 5000 series user s manual 2
- Technical support contact information 2
- Trademarks 2
- Www moxa com support 2
- Table of contents 3
- Introduction 5
- Oncell 5000 series introduction 6
- Overview 6
- Package checklist 6
- Product features 6
- Oncell 5000 series introduction 7
- Product specifications 7
- Specification comparison chart 7
- Oncell 5000 series introduction 8
- Getting started 9
- Oncell 5000 series getting started 10
- Oncell 5004 hspa 10
- Panel layout 10
- Oncell 5000 series getting started 11
- Oncell 5104 hspa 11
- Connecting the hardware 12
- Din rail and rack mounting 12
- Din rail mounting 12
- Oncell 5000 series getting started 12
- Wall or cabinet mounting 12
- Connecting the i o port 13
- Connecting the power 13
- Connecting to the network 13
- Oncell 5000 series getting started 13
- Sim card installation 13
- Attention 14
- Led indicators 14
- Oncell 5000 series getting started 14
- Reset button 14
- Initial ip address configuration 15
- Attention 16
- Configuration options 16
- Factory default ip address 16
- Oncell 5000 series initial ip address configuration 16
- Oncell search utility 16
- Static and dynamic ip addresses 16
- Web console 16
- Attention 17
- Oncell 5000 series initial ip address configuration 17
- Telnet console 17
- Oncell 5000 series initial ip address configuration 18
- Oncell 5000 series initial ip address configuration 19
- Oncell 5000 series initial ip address configuration 20
- Serial console 20
- Oncell 5000 series initial ip address configuration 21
- Oncell 5000 series initial ip address configuration 22
- Web console configuration 23
- Accessing the web console 24
- Attention 24
- Oncell 5000 series web console configuration 24
- Web console navigation 24
- Attention 25
- Basic settings 25
- Device settings 25
- Oncell 5000 series web console configuration 25
- Time settings 25
- Lan settings 26
- Network settings 26
- Oncell 5000 series web console configuration 26
- Cellular wan settings 27
- Lan port configuration 27
- Oncell 5000 series web console configuration 27
- Guaranlink settings 28
- Oncell 5000 series web console configuration 28
- Overview 28
- Background 29
- Common settings 29
- Guaranlink check settings 29
- Oncell 5000 series web console configuration 29
- Ethernet wan settings 30
- Oncell 5000 series web console configuration 30
- Dns settings 31
- Oncell 5000 series web console configuration 31
- Auto ip report 32
- Dhcp settings 32
- Oncell 5000 series web console configuration 32
- Advanced network settings 33
- Firewall settings 33
- Oncell 5000 series web console configuration 33
- Oncell central manager 33
- Virtual server settings 33
- Oncell 5000 series web console configuration 34
- Wan ip filter 34
- Oncell 5000 series web console configuration 35
- Route table 35
- Vpn settings 35
- System management settings 36
- Misc network settings 37
- Oncell 5000 series system management settings 37
- Snmp agent settings 37
- Auto warning settings 38
- Ddns configuration 38
- Event settings 38
- Oncell 5000 series system management settings 38
- C wan x x x x c wan x x x x 39
- E mail alert 39
- E wan x x x x 39
- Modelname alert s n serial number lan lan ip lan mac address c wan e wan p wan wan ip yyyy mm dd hh mm ss message 39
- Oncell 5000 series system management settings 39
- Attention 40
- Oncell 5000 series system management settings 40
- Sms alert 40
- Snmp trap 40
- Console settings 41
- Maintenance 41
- Oncell 5000 series system management settings 41
- System log settings 41
- Configuration import export 42
- Firmware upgrade 42
- Oncell 5000 series system management settings 42
- Attention 43
- Change password 43
- Load factory defaults 43
- Oncell 5000 series system management settings 43
- Remote sms control 43
- Manual sms 44
- Oncell 5000 series system management settings 44
- Certificate 45
- Ethernet ssl certificate import 45
- Oncell 5000 series system management settings 45
- Ping test 45
- Certificate key delete 46
- Network connections 46
- Network statistics 46
- Oncell 5000 series system management settings 46
- Routing 46
- System monitoring 46
- Dhcp client list 47
- Dout state 47
- Internet sessions list 47
- Oncell 5000 series system management settings 47
- System log 47
- Din and power status 48
- Oncell 5000 series system management settings 48
- Restart 48
- Restart system 48
- Save configuration 48
- Introduction and configuring vpn 49
- Example gateway to gateway network topology 50
- Oncell 5000 series introduction and configuring vpn 50
- Oncell vpn specifications 50
- What are vpns 50
- Configuration 51
- Local network 51
- Manual key esp 51
- Oncell 5000 series introduction and configuring vpn 51
- Oncell vpn web console settings 51
- Remote network 51
- Incoming security settings 52
- Oncell 5000 series introduction and configuring vpn 52
- Outgoing security settings 52
- Configuration 53
- Isakmp psk 53
- Oncell 5000 series introduction and configuring vpn 53
- Remote network 53
- Advanced settings 54
- Isakmp key management 54
- Isakmp phase 1 54
- Isakmp phase 2 54
- Local identity 54
- Oncell 5000 series introduction and configuring vpn 54
- Oncell 5000 series introduction and configuring vpn 55
- Vpn system log events and error codes 55
- Oncell 5000 series introduction and configuring vpn 56
- Oncell central management software 56
- Oncell central serial device connection 56
- Oncell 5000 series introduction and configuring vpn 57
- Oncell central ethernet device connection 57
- Oncell search utility 58
- Installing the search utility 59
- Oncell 5000 series oncell search utility 59
- Configuring the oncell search utility 60
- Oncell 5000 series oncell search utility 60
- Oncell 5000 series oncell search utility 61
- Oncell 5000 series oncell search utility 62
- A default settings 63
- Default settings 63
- B dynamic domain name server 64
- Dynamic domain name server 64
- Overview 64
- Configuration 65
- Oncell 5000 series dynamic domain name server 65
- Auto ip report format 66
- Auto ip report protocol 66
- C auto ip report protocol 66
- Id list 66
- Info n 66
- Ap id hardware id mapping table 67
- Oncell 5000 series auto ip report protocol 67
Похожие устройства
- Moxa OnCell 5004-HSPA Руководство по программной части
- Moxa OnCell 5004-HSPA Технические характеристики
- Moxa OnCell 5004-HSPA Руководство по аппаратной части
- Orion DRL-12LED 36W Руководство по эксплуатации
- Moxa OnCell 5104-HSPA-T Инструкция по эксплуатации
- Moxa OnCell 5104-HSPA-T Руководство по программной части
- Moxa OnCell 5104-HSPA-T Технические характеристики
- Moxa OnCell 5104-HSPA-T Руководство по аппаратной части
- Orion FOG LIGHT 5W-40мм Руководство по эксплуатации
- Moxa OnCell 5104-HSPA Инструкция по эксплуатации
- Moxa OnCell 5104-HSPA Руководство по программной части
- Moxa OnCell 5104-HSPA Технические характеристики
- Moxa OnCell 5104-HSPA Руководство по аппаратной части
- Orion FOG LIGHT 10W-64мм Руководство по эксплуатации
- Moxa WDR-3124A-EU Инструкция по эксплуатации
- Moxa WDR-3124A-EU Руководство по подключению
- Moxa WDR-3124A-EU Технические характеристики
- Moxa WDR-3124A-EU-T Инструкция по эксплуатации
- Moxa WDR-3124A-EU-T Руководство по подключению
- Moxa WDR-3124A-EU-T Технические характеристики