Moxa VPort P26A-1MP-T [54/82] Telnet

Moxa VPort 26A-1MP System Configuration

4-26

EAP-TLS

NOTE

Please consult an expert or your network administrator for the configurations of 802.1X if you have trouble in

it.

Telnet

Use this option to Enable/Disable the telnet function.

LLDP

LLDP is an OSI Layer 2 protocol defined by IEEE 802.11AB. LLDP standardizes the self-identification

advertisement method, and allows each networking device, such as a Moxa IP camera or managed switch, to

periodically send its system and configuration information to its neighbors. Because of this, all LLDP devices are

kept informed of each other’s status and configuration, and with SNMP, this information can be transferred to

some network management software, such as Moxa’s MXview for auto-topology and network visualization.

From the VPort’s web interface, you can enable or disable LLDP, and set the LLDP transmit interval. In addition,

you can view each VPort’s neighbor-list, which is reported by its network neighbors. Most importantly, enabling

the LLDP function allows Moxa’s MXview to automatically display the network’s topology and system setup

details for the entire network.

Setting Description Factory Default

Operation Mode Choose the operation mode of LLDP: Disabled, Transmit only,

Receive only, and Transmit and receive.

Transmit and

receive

Transmit interval Sets the transmit interval of LLDP messages, in seconds. 30