Moxa MxNVR-IA8-T [37/61] Firmware upgrade

Moxa MxNVR-IA8 System Configuration

4-8

NOTE The system parameter import/export functions allow the Administrator to back up and restore system

configurations. The administrator can export this sys_config.ini file (in a special

binary format) for backup, and

import the sys_config.ini file to restore the system configurations of the

MxNVR. System configuration changes

will take effect after the MxNVR is rebooted.

Firmware Upgrade

Take the following steps to upgrade the firmware:

Step 1: Click on the Browse button to select the firmware file.

NOTE For the MxNVR-IA8, the firmware file extension should be .rom.

Step 2: Click on the Upgrade button to upload the firmware to the MxNVR.

Step 3: The system will start to run the firmware upgrade process.

Step 4: Once Firmware Update Success…..Reboot.... is displayed, please wait for few seconds for the

VPort to reboot. The rebooting process is finished once the STAT LED is lit continuously in green.

NOTE Upgrading the firmware will not change the original settings.

Reset to Factory Default

From the Reset to Factory Default page, click on OK (as shown in the following figure) to reset the MxNVR

to its factory default settings.