Condtrol IR-T2 [12/15] Ir t2 condtrol ir t2 condtrol

User Manual User Manual

IR-T2 CONDTROLIR-T2 CONDTROL

INFRARED THERMOMETER

6. The Laser indicates the approximate area of detection.

7. LCD displays the Dew Point value after 2 seconds even though other

values are still drifting under stabilization mode.

8. Release the Activation Trigger. LCD holds all temperature and humidity

display readings including dew bar.

9. Timer count down 2 minutes if no key is pressed. Auto power off.

STABILIZATION MODE

1. While taking measurement, if the ambient temperature and relative

humidity readings are NOT stable or more than +/- 1 reading units the

stabilization icon displays with bar appearing sequentially. Once its thermal

and hydro equilibrium reached within +/-1 units (e.g. +/-1 deg.C or +/- 1% RH

stable) the stabilization icon disappears.

MAX / MIN / AVG

1. Users can read the Maximum, Minimum, and Average of the last

temperature and humidity reading value by pressing the Max/Min/Avg

button in cycle.

2. Users can delete (clear) the stored value of Maximum, Minimum and

Average surface temperature by pressing and holding the Max/Min/Avg

button for 2 seconds.

EMISSIVITY MODE

1. Press “Max/Min/Avg” key repeatedly until it reach the Emissivity setting

mode.

2. The default value of emissivity value is 0.95

3. Press Activation Trigger to adjust the emissivity value.

4. In the Emissivity mode, the IR temperature is shown for reference.

IR Temp

Flashing

Emissivity