![Citizen CL-S700 [45/80] Printer operation](/img/pdf.png)
Citizen CL-S700 [45/80] Printer operation
![Citizen CL-S700 [45/80] Printer operation](/views2/1204396/page45/bg2d.png)
45
Printer Operation
Top Menu Sub Menu Default Menu Remarks
Rewinder Auto Off On [CL-S700R only]
Online*** Off Sets the Rewinder Auto Online.
[Rew Auto Online] In the case in which the setting is On, when
the Rewinder Open Error occurs, if the
Rewinder Cover is closed, it will automatically
return to Online and printing will restart.
Rewinder Online 2 sec 1 to 10 sec [CL-S700R only]
Delay*** Sets the Rewinder Online Delay.
[Rew OnlineDelay] Sets the time until the Rewinder restarts after
the Rewinder Cover is closed when the above
Rewinder Auto Online is On.
Rewinder Torque*** 4 1 to 7 [CL-S700R only]
Sets the Rewinder Torque.
Peel Wait Delay** 0.1 sec 0.1 to 2.0 sec Sets the Peel Wait Delay.
Displays only machines with a peeler
installed.
Paper Position 0.00 inch Peel/Cut/Tear Off Adjusts the stop position. It is based on the
0.00 mm 0.00 to 2.00 inch inch/millimeter setting. There are initial
0.0 to 50.8 mm values of the stop position for each device
Peel/Cut/Tear On set above, and later, relative values are set.
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Menu Key Action Enters Menu Enters Menu Sets the menu key action.
Repeat Last Set Enters Menu:
Repeat Last One Enters the menu setup mode.
Repeat Last Set:
Repeats the number of copies.
Repeat Last One:
Last one is issued only for the final page.
In the case of a count, afterwards, only
last one is issued.
Note: Hold down the MENU key for at least 4
seconds in order to enter the Menu Setup
Mode when setting the “Repeat Last Set” or
“Repeat Last One” menus.
Interfaces RS-232C Baud 9600 115200 Setting the baud rate of the serial interface.
57600 • All settings related to the interface are
38400 enabled after the power is reconnected.
19200
9600
4800
2400
RS-232C Parity None None Setting the communication parity for the
Odd serial interface.
Even
RS-232C Length 8 bits 8 bits Setting the character length for the serial
7 bits interface.
RS-232C Stop bit 1 bit 1 bit Setting the stop bit for the serial interface.
[RS-232C Stopbit] 2 bits
RS-232C X-ON On Yes On Yes Selectively setting the X-ON flow control of
Off No the serial interface.
IEEE1284 On On Setting both direction of the Centro
Off Interface.
Web Monitor Auto Auto Selecting the web monitor function.
On
Off
Mode Settings
[Datamax
®
Emulation]
** Only when cutter is mounted.
*** Only the Rewinder.
Содержание
- Thermal transfer barcode label printer p.1
- Cl s700 series p.1
- Appendixes p.2
- Chapter 3 printer adjustments p.2
- Chapter 2 printer operation p.2
- Chapter 1 setup p.2
- Before operation p.2
- Contents p.2
- Chapter 4 troubleshooting 64 p.2
- Cl s700r only p.3
- Main features p.3
- Introduction p.3
- Hi ope p.3
- Before operation p.3
- Gs mark statement p.4
- Fcc compliance statementfor american users p.4
- Fcc compliance statement for american users p.4
- Compliance statementfor european users p.4
- Compliance statement for european users p.4
- Emi compliance statementfor canadian users p.5
- Emi compliance statement for canadian users p.5
- Etat de conformite emi a l usagedes utilisateurs canadiens p.5
- Etat de conformite emi a l usage des utilisateurs canadiens p.5
- Important safety instructions p.6
- Notice p.7
- Which must be strictly observed p.8
- Warning p.8
- Safety instructions p.8
- Caution p.8
- Precautions when installing the printer p.9
- General precautions p.9
- Caution p.9
- Removing the packing material p.10
- Confirmation of carton contents p.10
- Part names and functions p.11
- Inside the printer p.11
- Caution p.11
- Rewinder paper guide available as an option from your supplier p.15
- Rewinder flange p.15
- Rewinder cover p.15
- Peeler rollers p.15
- Part names and functions p.15
- Media entry slit cover p.15
- Operation panel p.16
- Rear view p.17
- Driver installation p.18
- Connection to power p.18
- Caution p.18
- Turn off both power switches of the printer and the computer 2 connect one end of the interface cable to the interface connector on the back of the printer and secure it with locks or locking screws where available 3 connect the other end of the interface cable to the interface connector on the computer and secure it with locks or locking screws where available p.19
- Serial interface p 0 parallel interface p 2 usb interface p 5 p.19
- Replacing the interface board p 6 p.19
- Connection to a computer p.19
- Power on off p.20
- Turning on the power p.20
- Turning off the power p.20
- Printer operation p.20
- Stop key it stops printing and cancels the alarm p.21
- Printer operation p.21
- Pause key temporarily pauses printing p.21
- Normal operating mode p.21
- Menu key p.21
- Feed key feeds media p.21
- Printer operation p.22
- Led functions p.22
- The position of label and tag media is sensed by either a transparent sensor or a reflective sensor transparent sensor detects the gaps between label media and notches of tag media reflective sensor detects the black mark p.23
- Setting the media p.23
- Printer operation p.23
- Media sizes p.23
- When using front sensors p.24
- Printer operation p.24
- When using adjustable sensor p.24
- Setting the media p.24
- Printer operation p.25
- Installing the media p.25
- Printer operation p.26
- Using the rewinder as a peeler cl s700r models peeling mode p.27
- Printer operation p.27
- Printer operation p.28
- Caution p.28
- Using the rewinder for batches of printed media cl s700r models rewind mode p.29
- Printer operation p.29
- Setting the media p.30
- Printer operation p.30
- Printer operation p.31
- Printer operation p.32
- Setting the ribbon p.32
- Setting method p.32
- Printer operation p.33
- Printer operation p.34
- When using label media p.35
- When using continuous media p.35
- Printer operation p.35
- Operation panel p 6 p.35
- Mode settings p.35
- Hex dump mode p.35
- Self print mode p.36
- Printer operation p.36
- Mode settings p.36
- Media adjustments p.36
- Case of label media p.36
- Case of continuous media p.36
- Printer operation p.37
- Mode settings p.37
- Menu setup mode p.37
- Functions of the keys p.37
- Caution p.37
- Printer operation p.38
- Mode settings p.38
- Example of changing a menu p.38
- Entering menu setup mode ensure lcd displays on line ready then press the menu key to enter menu setup mode where the printers settings can be changed or confirmed p.38
- To change the value of print darkness to 14 press the 5 key two times to display 14 on the screen then press the 3 key to temporarily save the value into the printer ram p.39
- Selecting print darkness from the sub menu press the key one time to display print darkness it is the second item within page setup p.39
- Printer operation p.39
- Mode settings p.39
- Entering sub menu press the 3 key the currently set item print speed is displayed p.39
- Displaying the set value of print darkness press the 3 key and the value 12 the currently set value is displayed p.39
- Mode settings p.40
- Save changes to settings unless you save your settings your changes will be lost when you turn off the printer p.40
- Printer operation p.40
- You can get a list of the configuration settings in two ways press menu key whilst turning the printer on the power led flashes and print settings is displayed on the lcd after printing the printer will enter menu setup mode you can access the configuration print via the test mode print pattern current config from the setup menu p.41
- Printing a list of settings p.41
- Printer operation p.41
- Note citizen continually enhances its printers with new options and settings based on our customer s requests extra or changed menu items may appear on the above print out in some cases p.41
- Mode settings p.41
- Example of changing a menu p 8 p.41
- Printer operation p.42
- Mode settings p.42
- Global configuration sets p.42
- Mode settings datama p.43
- Menu setting table p.43
- Menu setting p.43
- Emulation p.43
- Datama p.43
- Printer operation p.43
- Press the menu key in print possible status to enter menu setup mode use the keys on the operation panel according to the lcd display to setup the printer the contents that can be setup on the printer are shown below and the items that are actually displayed on the lcd are shown in p.43
- Page setup menu allows you to change settings related to the media or print quality system setup menu allows you to change settings for the printer hardware and basic control systems after print menu changes how the printer reacts after the label has been printed interfaces changes interface parameters such as baud rate machine information test mode allows you to check and or print test pages and information about the printer global config menu allows you to switch between 3 complete config sets contained within the printer p.43
- Printer operation p.44
- Mode settings datama p.44
- Emulation p.44
- Printer operation p.45
- Mode settings datama p.45
- Emulation p.45
- Printer operation p.46
- Mode settings datama p.46
- Emulation p.46
- Printer operation p.47
- Mode settings zebr p.47
- Emulation p.47
- Emulation p.48
- Printer operation p.48
- Mode settings zebr p.48
- Printer operation p.49
- Mode settings zebr p.49
- Emulation p.49
- Printer operation p.50
- Mode settings zebr p.50
- Emulation p.50
- Setting method p.51
- Quick setup of the print method p.51
- Printer operation p.51
- Menu setup mode p 7 p.51
- Caution p.51
- Printer operation p.52
- Emulation auto detection p.52
- Important p.53
- When rewinding the liner using the peeler p.53
- When rewinding printed media without using the peeler p.53
- Setting the menu for the rewinder cl s700r only p.53
- Rewinder capacity display p.53
- Printer operation p.53
- On line ready rewind p.53
- Sensor adjustments and calibration p.54
- Quick sensor selection method transparent reflective p.54
- Printer adjustments p.54
- Entering sensor adjustment mode p.54
- Printer adjustments p.55
- Adjusting the transparent sensor p.55
- Printer adjustments p.56
- Adjusting the reflective sensor p.56
- Looking in at the media thickness check window reset the printhead offset so that it comes to the center line middle of the three lines by turning the media thickness adjustment screw with a screwdriver then turn the media thickness adjustment screw two to four times counterclockwise with a screwdriver factory setting two turns 2 make fine adjustments by checking the self test print p.57
- Installing the media p 5 p 7 p.57
- When using thick media tags or other media p.57
- When using standard labels or thermal media p.57
- Printer adjustments p.57
- Media thickness adjustment p.57
- Looking in at the media thickness check window reset the printhead position so that it comes to the center line middle of the three lines by turning the media thickness adjustment screw with a screwdriver 2 then turn the media thickness adjustment screw two to four times clockwise with a screwdriver 3 make fine adjustments by checking the self test print p.57
- Printer adjustments p.58
- Media width adjustment p.58
- Setting the ribbon p 2 p.59
- Printer adjustments p.59
- General ribbon and media factory setting both marks on winding and feeding sections are set to standard so as to obtain the optimum printing condition for the recommended ink ribbon and media p.59
- Adjusting the ribbon p.59
- Adjusting places p.59
- Adjusting method p.59
- Printer adjustments p.60
- Menu setting table p 3 ensure the adjustable sensor is selected p.61
- Measure your required detection position beforehand using the scale on the upper guide rail move the adjustable sensor to the required detection position by tuning the adjustable knob it is useful to align the yellow mark on the top of the adjustable sensor with the scale showing the required detection position p.61
- Printer adjustments p.61
- Operating procedure p.61
- Moving the adjustable sensor p.61
- Printer adjustments p.62
- Cleaning p.62
- Printer adjustments p.63
- Cleaning p.63
- Caution p.63
- Troubleshooting p.64
- Setting the ribbon p 2 installing the media p 5 p27 setting method p 2 menu setting table p 3 cleaning p 2 p.64
- Items to check when a malfunction occurs p.64
- Connection to power p 8 p.64
- Cleaning p 2 p.64
- Led functions p 2 p.65
- Installing the media p 5 p27 setting method p 2 cleaning p 2 p.65
- Adjusting the ribbon p 9 p.65
- Troubleshooting p.65
- Setting the ribbon p 2 p.65
- Menu setting table p 3 p.65
- Media width adjustment p 8 p.65
- Media thickness adjustment p 7 p.65
- Specifications p.66
- Appendixes p.66
- Specifications p.67
- Appendixes p.67
- Unit mm inch p.68
- Specifications p.68
- Appendixes p.68
- Specifications p.69
- Appendixes p.69
- Interfaces p.70
- Appendixes p.70
- Specifications p.70
- Signal line and pin arrangement p.70
- Serial interface p.70
- Xon xoff protocol p.71
- Requirements to output x on code p.71
- Requirements to output the x off code p.71
- Interfaces p.71
- Dtr protocol p.71
- Appendixes p.71
- Specifications p.72
- Signal line and pin assignment table p.72
- Parallel interface p.72
- Interfaces p.72
- Appendixes p.72
- Compatible timing specification p.73
- Appendixes p.73
- While receiving data p.73
- When power is on time it goes off line p.73
- The status of a signal line will not be changed in bi directional mode such as nibble or ecp mode p.73
- Parallel port status signals when an error occurs p.73
- Note busy rises when strobe signal starts and data is latched with strobe signal starts p.73
- Interfaces p.73
- While receiving init signal p.74
- Relation of the timing of the busy signal and the ack signal p.74
- Note if the init signal does not have width of 10 to 15 µ sec or more it cannot act as an init signal if it is lower the init signal is ignored busy starts up when the init signal is perceived p.74
- Interfaces p.74
- Center ack p.74
- Appendixes p.74
- Usb interface p.75
- Specifications p.75
- Signal line and pin arrangement p.75
- Interfaces p.75
- Appendixes p.75
- Replacing the interface board p.76
- Replacement method p.76
- Caution p.76
- Appendixes p.76
- Appendixes p.77
Похожие устройства
-
Citizen CL-E720Command Reference DMX -
Citizen CL-E720Утилита для печати этикеток -
Citizen CL-E720Command Reference ZPL -
Citizen CL-E720Autocutter -
Citizen CL-E720Сетевые карты -
Citizen CL-S700Описание системы команд -
Citizen CL-S700Краткая инструкция -
Citizen CL-S700Брошюра -
Citizen CL-E720Руководство пользователя -
Citizen CL-E720Брошюра -
Epson TM-T20III C31CH51011Руководство по эксплуатации -
Mertech TLP100 Terra Nova 4588Руководство по эксплуатации