![Citizen CL-S700 [44/80] Printer operation](/img/pdf.png)
Citizen CL-S700 [44/80] Printer operation
![Citizen CL-S700 [44/80] Printer operation](/views2/1204396/page44/bg2c.png)
2
Printer Operation
44
Mode Settings
[Datamax
®
Emulation]
Top Menu Sub Menu Default Menu Remarks
Cover Open Sensor Off On Sets the cover open sensor.
[Cover Sensor] Off
Buzzer Select Exec/Err Exec/Err Setting buzzer sounding conditions.
All
Error
Key
None
Metric/Inch Inch Inch Sets the units.
[Metric/Inch Sel] mm
Max Media Length 10.00 inch 1.00 to 50.00 inch Sets the maximum media length.
[Max Media Len] 254.0 mm 25.4 to 1270.0 mm
Settings Lock Off On Prevents a command changing the set value.
Off
Keyboard Lock Off On Prevents a change by a key operation.
Off Note: Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode when
setting the “On” menu.
Control Code STD STD Switches command mode of DMX mode.
ALT
ALT-2
Emulation Select DM4 DM4 Selects DataMax
®
/Zebra
®
compatibility
[Emulation Sel] DMI DM4: DataMax
®
400
DPP DMI: DataMax
®
IClass
ZPI2 DPP: DataMax
®
Prodigy Plus
®
ZPI2: Zebra
®
2844Z
Emulation Auto On On Setting emulation (as above) auto detection.
Detect Off
[Emulation Auto] Full Auto
After Print AutoConfigure On On Automatically configures optional devices.
[Auto Config] Off On .... AutoConfigure enabled (Regardless of
whether Function Select is set, if a
peeler or cutter is installed, each mode
is set automatically.)
Off ... AutoConfigure disabled (A peeler of
cutter is installed, but to not operate
the peeler or cutter, turn it Off and the
operation is selected by
Function Select.)
Function Select Tear Off Selects the operation when the
[Function Sel] Tear AutoConfigure is set to Off. Designates the
Peel On* paper position based on each option. The
Cut On** operation of this device is enabled during
Rewind*** selection. At the same time, the parameters of
the f command of Prodigy Plus are emulated
for each optional device.
Cutter Type Standard Standard Selects the cutter type.
Heavy Duty Standard: Model JN98901
Heavy Duty: Model JN98911
Cutter Action Backfeed Backfeed Sets the cutter action.
Through With the optional AutoConfigure On, printing
is executed only when the cutter is installed
or only when Cut is selected by Function
Select.
Backfeed is always set after cutting.
Through is set at the rear end of sheets 1 to
n-1 when the number of copies = n, and the
rear end of the final page of single sheet and
the copy is backfeed.
* Only when peeling option is mounted.
** Only when cutter is mounted.
*** Only the Rewinder.
Содержание
- Cl s700 series 1
- Thermal transfer barcode label printer 1
- Appendixes 2
- Before operation 2
- Chapter 1 setup 2
- Chapter 2 printer operation 2
- Chapter 3 printer adjustments 2
- Chapter 4 troubleshooting 64 2
- Contents 2
- Before operation 3
- Cl s700r only 3
- Hi ope 3
- Introduction 3
- Main features 3
- Compliance statement for european users 4
- Compliance statementfor european users 4
- Fcc compliance statement for american users 4
- Fcc compliance statementfor american users 4
- Gs mark statement 4
- Emi compliance statement for canadian users 5
- Emi compliance statementfor canadian users 5
- Etat de conformite emi a l usage des utilisateurs canadiens 5
- Etat de conformite emi a l usagedes utilisateurs canadiens 5
- Important safety instructions 6
- Notice 7
- Caution 8
- Safety instructions 8
- Warning 8
- Which must be strictly observed 8
- Caution 9
- General precautions 9
- Precautions when installing the printer 9
- Confirmation of carton contents 10
- Removing the packing material 10
- Caution 11
- Inside the printer 11
- Part names and functions 11
- Media entry slit cover 15
- Part names and functions 15
- Peeler rollers 15
- Rewinder cover 15
- Rewinder flange 15
- Rewinder paper guide available as an option from your supplier 15
- Operation panel 16
- Rear view 17
- Caution 18
- Connection to power 18
- Driver installation 18
- Connection to a computer 19
- Replacing the interface board p 6 19
- Serial interface p 0 parallel interface p 2 usb interface p 5 19
- Turn off both power switches of the printer and the computer 2 connect one end of the interface cable to the interface connector on the back of the printer and secure it with locks or locking screws where available 3 connect the other end of the interface cable to the interface connector on the computer and secure it with locks or locking screws where available 19
- Power on off 20
- Printer operation 20
- Turning off the power 20
- Turning on the power 20
- Feed key feeds media 21
- Menu key 21
- Normal operating mode 21
- Pause key temporarily pauses printing 21
- Printer operation 21
- Stop key it stops printing and cancels the alarm 21
- Led functions 22
- Printer operation 22
- Media sizes 23
- Printer operation 23
- Setting the media 23
- The position of label and tag media is sensed by either a transparent sensor or a reflective sensor transparent sensor detects the gaps between label media and notches of tag media reflective sensor detects the black mark 23
- Printer operation 24
- Setting the media 24
- When using adjustable sensor 24
- When using front sensors 24
- Installing the media 25
- Printer operation 25
- Printer operation 26
- Printer operation 27
- Using the rewinder as a peeler cl s700r models peeling mode 27
- Caution 28
- Printer operation 28
- Printer operation 29
- Using the rewinder for batches of printed media cl s700r models rewind mode 29
- Printer operation 30
- Setting the media 30
- Printer operation 31
- Printer operation 32
- Setting method 32
- Setting the ribbon 32
- Printer operation 33
- Printer operation 34
- Hex dump mode 35
- Mode settings 35
- Operation panel p 6 35
- Printer operation 35
- When using continuous media 35
- When using label media 35
- Case of continuous media 36
- Case of label media 36
- Media adjustments 36
- Mode settings 36
- Printer operation 36
- Self print mode 36
- Caution 37
- Functions of the keys 37
- Menu setup mode 37
- Mode settings 37
- Printer operation 37
- Entering menu setup mode ensure lcd displays on line ready then press the menu key to enter menu setup mode where the printers settings can be changed or confirmed 38
- Example of changing a menu 38
- Mode settings 38
- Printer operation 38
- Displaying the set value of print darkness press the 3 key and the value 12 the currently set value is displayed 39
- Entering sub menu press the 3 key the currently set item print speed is displayed 39
- Mode settings 39
- Printer operation 39
- Selecting print darkness from the sub menu press the key one time to display print darkness it is the second item within page setup 39
- To change the value of print darkness to 14 press the 5 key two times to display 14 on the screen then press the 3 key to temporarily save the value into the printer ram 39
- Mode settings 40
- Printer operation 40
- Save changes to settings unless you save your settings your changes will be lost when you turn off the printer 40
- Example of changing a menu p 8 41
- Mode settings 41
- Note citizen continually enhances its printers with new options and settings based on our customer s requests extra or changed menu items may appear on the above print out in some cases 41
- Printer operation 41
- Printing a list of settings 41
- You can get a list of the configuration settings in two ways press menu key whilst turning the printer on the power led flashes and print settings is displayed on the lcd after printing the printer will enter menu setup mode you can access the configuration print via the test mode print pattern current config from the setup menu 41
- Global configuration sets 42
- Mode settings 42
- Printer operation 42
- Datama 43
- Emulation 43
- Menu setting 43
- Menu setting table 43
- Mode settings datama 43
- Page setup menu allows you to change settings related to the media or print quality system setup menu allows you to change settings for the printer hardware and basic control systems after print menu changes how the printer reacts after the label has been printed interfaces changes interface parameters such as baud rate machine information test mode allows you to check and or print test pages and information about the printer global config menu allows you to switch between 3 complete config sets contained within the printer 43
- Press the menu key in print possible status to enter menu setup mode use the keys on the operation panel according to the lcd display to setup the printer the contents that can be setup on the printer are shown below and the items that are actually displayed on the lcd are shown in 43
- Printer operation 43
- Emulation 44
- Mode settings datama 44
- Printer operation 44
- Emulation 45
- Mode settings datama 45
- Printer operation 45
- Emulation 46
- Mode settings datama 46
- Printer operation 46
- Emulation 47
- Mode settings zebr 47
- Printer operation 47
- Emulation 48
- Mode settings zebr 48
- Printer operation 48
- Emulation 49
- Mode settings zebr 49
- Printer operation 49
- Emulation 50
- Mode settings zebr 50
- Printer operation 50
- Caution 51
- Menu setup mode p 7 51
- Printer operation 51
- Quick setup of the print method 51
- Setting method 51
- Emulation auto detection 52
- Printer operation 52
- Important 53
- On line ready rewind 53
- Printer operation 53
- Rewinder capacity display 53
- Setting the menu for the rewinder cl s700r only 53
- When rewinding printed media without using the peeler 53
- When rewinding the liner using the peeler 53
- Entering sensor adjustment mode 54
- Printer adjustments 54
- Quick sensor selection method transparent reflective 54
- Sensor adjustments and calibration 54
- Adjusting the transparent sensor 55
- Printer adjustments 55
- Adjusting the reflective sensor 56
- Printer adjustments 56
- Installing the media p 5 p 7 57
- Looking in at the media thickness check window reset the printhead offset so that it comes to the center line middle of the three lines by turning the media thickness adjustment screw with a screwdriver then turn the media thickness adjustment screw two to four times counterclockwise with a screwdriver factory setting two turns 2 make fine adjustments by checking the self test print 57
- Looking in at the media thickness check window reset the printhead position so that it comes to the center line middle of the three lines by turning the media thickness adjustment screw with a screwdriver 2 then turn the media thickness adjustment screw two to four times clockwise with a screwdriver 3 make fine adjustments by checking the self test print 57
- Media thickness adjustment 57
- Printer adjustments 57
- When using standard labels or thermal media 57
- When using thick media tags or other media 57
- Media width adjustment 58
- Printer adjustments 58
- Adjusting method 59
- Adjusting places 59
- Adjusting the ribbon 59
- General ribbon and media factory setting both marks on winding and feeding sections are set to standard so as to obtain the optimum printing condition for the recommended ink ribbon and media 59
- Printer adjustments 59
- Setting the ribbon p 2 59
- Printer adjustments 60
- Measure your required detection position beforehand using the scale on the upper guide rail move the adjustable sensor to the required detection position by tuning the adjustable knob it is useful to align the yellow mark on the top of the adjustable sensor with the scale showing the required detection position 61
- Menu setting table p 3 ensure the adjustable sensor is selected 61
- Moving the adjustable sensor 61
- Operating procedure 61
- Printer adjustments 61
- Cleaning 62
- Printer adjustments 62
- Caution 63
- Cleaning 63
- Printer adjustments 63
- Cleaning p 2 64
- Connection to power p 8 64
- Items to check when a malfunction occurs 64
- Setting the ribbon p 2 installing the media p 5 p27 setting method p 2 menu setting table p 3 cleaning p 2 64
- Troubleshooting 64
- Adjusting the ribbon p 9 65
- Installing the media p 5 p27 setting method p 2 cleaning p 2 65
- Led functions p 2 65
- Media thickness adjustment p 7 65
- Media width adjustment p 8 65
- Menu setting table p 3 65
- Setting the ribbon p 2 65
- Troubleshooting 65
- Appendixes 66
- Specifications 66
- Appendixes 67
- Specifications 67
- Appendixes 68
- Specifications 68
- Unit mm inch 68
- Appendixes 69
- Specifications 69
- Appendixes 70
- Interfaces 70
- Serial interface 70
- Signal line and pin arrangement 70
- Specifications 70
- Appendixes 71
- Dtr protocol 71
- Interfaces 71
- Requirements to output the x off code 71
- Requirements to output x on code 71
- Xon xoff protocol 71
- Appendixes 72
- Interfaces 72
- Parallel interface 72
- Signal line and pin assignment table 72
- Specifications 72
- Appendixes 73
- Compatible timing specification 73
- Interfaces 73
- Note busy rises when strobe signal starts and data is latched with strobe signal starts 73
- Parallel port status signals when an error occurs 73
- The status of a signal line will not be changed in bi directional mode such as nibble or ecp mode 73
- When power is on time it goes off line 73
- While receiving data 73
- Appendixes 74
- Center ack 74
- Interfaces 74
- Note if the init signal does not have width of 10 to 15 µ sec or more it cannot act as an init signal if it is lower the init signal is ignored busy starts up when the init signal is perceived 74
- Relation of the timing of the busy signal and the ack signal 74
- While receiving init signal 74
- Appendixes 75
- Interfaces 75
- Signal line and pin arrangement 75
- Specifications 75
- Usb interface 75
- Appendixes 76
- Caution 76
- Replacement method 76
- Replacing the interface board 76
- Appendixes 77
Похожие устройства
- Citizen CL-S700 Краткая инструкция
- Citizen CL-S700 Описание системы команд
- Zte E5501 Datasheet
- Zte E5501 Краткое руководство
- Miele 11997064EU4 Инструкция по эксплуатации
- Miele Aqua Caps 11997057EU4 Инструкция по эксплуатации
- Miele Cocoon Caps 11997059EU4 Инструкция по эксплуатации
- Miele Nature Caps 11997058EU4 Инструкция по эксплуатации
- Miele 11997061D WoolCare Caps Инструкция по эксплуатации
- Miele 11997062D Инструкция по эксплуатации
- Miele 11997055EU3 Инструкция по эксплуатации
- Miele 11997056EU3 Инструкция по эксплуатации
- Miele 11997065EU4 Инструкция по эксплуатации
- Miele 11997060D Инструкция по эксплуатации
- Miele SCC 10 CarCare Инструкция по эксплуатации
- Miele SF-HA 30 AirClean Инструкция по эксплуатации
- Miele SF-HA 50 AirClean Инструкция по эксплуатации
- Monster Diamond tears edge on-ear headphones (128426-00) Инструкция по эксплуатации
- Monster DNA Black Инструкция по эксплуатации
- Monster NPULSE Black Инструкция по эксплуатации
Скачать
Случайные обсуждения