![Citizen CL-S700 [47/80] Printer operation](/img/pdf.png)
Citizen CL-S700 [47/80] Printer operation
![Citizen CL-S700 [47/80] Printer operation](/views2/1204396/page47/bg2f.png)
47
Printer Operation
7 Zebra
®
Emulation
Mode Settings
[Zebra
®
Emulation]
Top Menu Sub Menu Default Menu Remarks
Page Setup Print Speed* 7 IPS 2 to 10 IPS [For CL-S700/CL-S700R]
Printing speed setting.
7 IPS 2 to 8 IPS [For CL-S703]
Printing speed setting.
Print Darkness 12 00 to 30 Adjusting print darkness.
Darkness Adjust 00 -10 to 10 Fine adjustment of darkness commands.
[Darkness Adj]
Print Method TT TT (Thermal Transfer) Selection of Thermal Transfer (ribbon) or
DT (Direct Thermal) Direct Thermal.
Continuous Media 4.00 inch 0.25 to 32.00 inch Setting media length of continuous media.
Length 101.6 mm 6.4 to 812.8 mm Lower level = during mm mode.
[Cont Media Len]
Vertical Position 0.00 inch -1.00 to 1.00 inch Adjusting printing start position.
[Vertical Pos] 0.0 mm -25.4 to 25.4mm
Horizontal Shift 0.00 inch -1.00 to 1.00 inch Adjusting horizontal image position.
[Horizontal Shif] 0.0 mm -25.4 to 25.4mm
Sensor Select Rear Adj Sensor Rear Adj Sensor Selecting front fixed/rear adj. sensor.
Front Fixed Sen
Media Sensor See Through See Through Selecting media sensor.
Reflect
None
Small Media Off On Setting for small media.
Adjustment Off
[Small Media Adj]
Small Media 1.00 inch 0.25 to 1.00 inch Setting media length for small media.
Length 25.4 mm 6.4 to 25.4mm
[Small Media Len]
Symbol Set PM 50 symbols Setting symbol set.
System Setup Sensor Monitor – – Displays level of sensor that is currently
selected.
Sensor Level 1.4 V 0.0 V to 3.0 V Selects threshold of the sensor.
Paper End Level 2.80 V 0.01 V to 3.00 V Sets the paper end level.
Error Reporting On Printing On Printing Setting for error report.
[Error Report] Immediate
Cover Open Sensor Off On Sets the cover open sensor.
[Cover Sensor] Off
Buzzer Select Exec/Err Exec/Err Setting buzzer sounding conditions.
All
Error
Key
None
Metric/Inch Inch Inch Sets the units.
[Metric/Inch Sel] mm
Max Media Length 10.00 inch 1.00 to 50.00 inch Sets the maximum media length.
[Max Media Len] 254.0 mm 25.4 to 1270.0 mm
Settings Lock Off On Prevents a command changing the set value.
Off
Keyboard Lock Off On Prevents a change by a key operation.
Off Note: Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode when
setting the “On” menu.
* 2 to 7 IPS for CL-S700/CL-S703 with optional peeler.
Содержание
- Thermal transfer barcode label printer p.1
- Cl s700 series p.1
- Chapter 3 printer adjustments p.2
- Chapter 2 printer operation p.2
- Appendixes p.2
- Chapter 1 setup p.2
- Before operation p.2
- Contents p.2
- Chapter 4 troubleshooting 64 p.2
- Cl s700r only p.3
- Main features p.3
- Introduction p.3
- Hi ope p.3
- Before operation p.3
- Gs mark statement p.4
- Fcc compliance statementfor american users p.4
- Fcc compliance statement for american users p.4
- Compliance statementfor european users p.4
- Compliance statement for european users p.4
- Etat de conformite emi a l usagedes utilisateurs canadiens p.5
- Etat de conformite emi a l usage des utilisateurs canadiens p.5
- Emi compliance statementfor canadian users p.5
- Emi compliance statement for canadian users p.5
- Important safety instructions p.6
- Notice p.7
- Which must be strictly observed p.8
- Warning p.8
- Safety instructions p.8
- Caution p.8
- Precautions when installing the printer p.9
- General precautions p.9
- Caution p.9
- Removing the packing material p.10
- Confirmation of carton contents p.10
- Part names and functions p.11
- Inside the printer p.11
- Caution p.11
- Rewinder paper guide available as an option from your supplier p.15
- Part names and functions p.15
- Media entry slit cover p.15
- Rewinder flange p.15
- Rewinder cover p.15
- Peeler rollers p.15
- Operation panel p.16
- Rear view p.17
- Driver installation p.18
- Connection to power p.18
- Caution p.18
- Turn off both power switches of the printer and the computer 2 connect one end of the interface cable to the interface connector on the back of the printer and secure it with locks or locking screws where available 3 connect the other end of the interface cable to the interface connector on the computer and secure it with locks or locking screws where available p.19
- Serial interface p 0 parallel interface p 2 usb interface p 5 p.19
- Replacing the interface board p 6 p.19
- Connection to a computer p.19
- Turning off the power p.20
- Printer operation p.20
- Power on off p.20
- Turning on the power p.20
- Stop key it stops printing and cancels the alarm p.21
- Printer operation p.21
- Pause key temporarily pauses printing p.21
- Normal operating mode p.21
- Menu key p.21
- Feed key feeds media p.21
- Printer operation p.22
- Led functions p.22
- The position of label and tag media is sensed by either a transparent sensor or a reflective sensor transparent sensor detects the gaps between label media and notches of tag media reflective sensor detects the black mark p.23
- Setting the media p.23
- Printer operation p.23
- Media sizes p.23
- When using front sensors p.24
- When using adjustable sensor p.24
- Setting the media p.24
- Printer operation p.24
- Printer operation p.25
- Installing the media p.25
- Printer operation p.26
- Using the rewinder as a peeler cl s700r models peeling mode p.27
- Printer operation p.27
- Printer operation p.28
- Caution p.28
- Using the rewinder for batches of printed media cl s700r models rewind mode p.29
- Printer operation p.29
- Setting the media p.30
- Printer operation p.30
- Printer operation p.31
- Setting the ribbon p.32
- Setting method p.32
- Printer operation p.32
- Printer operation p.33
- Printer operation p.34
- When using label media p.35
- When using continuous media p.35
- Printer operation p.35
- Operation panel p 6 p.35
- Mode settings p.35
- Hex dump mode p.35
- Self print mode p.36
- Printer operation p.36
- Mode settings p.36
- Media adjustments p.36
- Case of label media p.36
- Case of continuous media p.36
- Functions of the keys p.37
- Caution p.37
- Printer operation p.37
- Mode settings p.37
- Menu setup mode p.37
- Printer operation p.38
- Mode settings p.38
- Example of changing a menu p.38
- Entering menu setup mode ensure lcd displays on line ready then press the menu key to enter menu setup mode where the printers settings can be changed or confirmed p.38
- To change the value of print darkness to 14 press the 5 key two times to display 14 on the screen then press the 3 key to temporarily save the value into the printer ram p.39
- Selecting print darkness from the sub menu press the key one time to display print darkness it is the second item within page setup p.39
- Printer operation p.39
- Mode settings p.39
- Entering sub menu press the 3 key the currently set item print speed is displayed p.39
- Displaying the set value of print darkness press the 3 key and the value 12 the currently set value is displayed p.39
- Save changes to settings unless you save your settings your changes will be lost when you turn off the printer p.40
- Printer operation p.40
- Mode settings p.40
- You can get a list of the configuration settings in two ways press menu key whilst turning the printer on the power led flashes and print settings is displayed on the lcd after printing the printer will enter menu setup mode you can access the configuration print via the test mode print pattern current config from the setup menu p.41
- Printing a list of settings p.41
- Printer operation p.41
- Note citizen continually enhances its printers with new options and settings based on our customer s requests extra or changed menu items may appear on the above print out in some cases p.41
- Mode settings p.41
- Example of changing a menu p 8 p.41
- Printer operation p.42
- Mode settings p.42
- Global configuration sets p.42
- Press the menu key in print possible status to enter menu setup mode use the keys on the operation panel according to the lcd display to setup the printer the contents that can be setup on the printer are shown below and the items that are actually displayed on the lcd are shown in p.43
- Page setup menu allows you to change settings related to the media or print quality system setup menu allows you to change settings for the printer hardware and basic control systems after print menu changes how the printer reacts after the label has been printed interfaces changes interface parameters such as baud rate machine information test mode allows you to check and or print test pages and information about the printer global config menu allows you to switch between 3 complete config sets contained within the printer p.43
- Mode settings datama p.43
- Menu setting table p.43
- Menu setting p.43
- Emulation p.43
- Datama p.43
- Printer operation p.43
- Printer operation p.44
- Mode settings datama p.44
- Emulation p.44
- Printer operation p.45
- Mode settings datama p.45
- Emulation p.45
- Printer operation p.46
- Mode settings datama p.46
- Emulation p.46
- Printer operation p.47
- Mode settings zebr p.47
- Emulation p.47
- Printer operation p.48
- Mode settings zebr p.48
- Emulation p.48
- Printer operation p.49
- Mode settings zebr p.49
- Emulation p.49
- Printer operation p.50
- Mode settings zebr p.50
- Emulation p.50
- Setting method p.51
- Quick setup of the print method p.51
- Printer operation p.51
- Menu setup mode p 7 p.51
- Caution p.51
- Printer operation p.52
- Emulation auto detection p.52
- Printer operation p.53
- On line ready rewind p.53
- Important p.53
- When rewinding the liner using the peeler p.53
- When rewinding printed media without using the peeler p.53
- Setting the menu for the rewinder cl s700r only p.53
- Rewinder capacity display p.53
- Sensor adjustments and calibration p.54
- Quick sensor selection method transparent reflective p.54
- Printer adjustments p.54
- Entering sensor adjustment mode p.54
- Printer adjustments p.55
- Adjusting the transparent sensor p.55
- Printer adjustments p.56
- Adjusting the reflective sensor p.56
- Media thickness adjustment p.57
- Looking in at the media thickness check window reset the printhead position so that it comes to the center line middle of the three lines by turning the media thickness adjustment screw with a screwdriver 2 then turn the media thickness adjustment screw two to four times clockwise with a screwdriver 3 make fine adjustments by checking the self test print p.57
- Looking in at the media thickness check window reset the printhead offset so that it comes to the center line middle of the three lines by turning the media thickness adjustment screw with a screwdriver then turn the media thickness adjustment screw two to four times counterclockwise with a screwdriver factory setting two turns 2 make fine adjustments by checking the self test print p.57
- Installing the media p 5 p 7 p.57
- When using thick media tags or other media p.57
- When using standard labels or thermal media p.57
- Printer adjustments p.57
- Printer adjustments p.58
- Media width adjustment p.58
- Setting the ribbon p 2 p.59
- Printer adjustments p.59
- General ribbon and media factory setting both marks on winding and feeding sections are set to standard so as to obtain the optimum printing condition for the recommended ink ribbon and media p.59
- Adjusting the ribbon p.59
- Adjusting places p.59
- Adjusting method p.59
- Printer adjustments p.60
- Operating procedure p.61
- Moving the adjustable sensor p.61
- Menu setting table p 3 ensure the adjustable sensor is selected p.61
- Measure your required detection position beforehand using the scale on the upper guide rail move the adjustable sensor to the required detection position by tuning the adjustable knob it is useful to align the yellow mark on the top of the adjustable sensor with the scale showing the required detection position p.61
- Printer adjustments p.61
- Printer adjustments p.62
- Cleaning p.62
- Printer adjustments p.63
- Cleaning p.63
- Caution p.63
- Troubleshooting p.64
- Setting the ribbon p 2 installing the media p 5 p27 setting method p 2 menu setting table p 3 cleaning p 2 p.64
- Items to check when a malfunction occurs p.64
- Connection to power p 8 p.64
- Cleaning p 2 p.64
- Media width adjustment p 8 p.65
- Media thickness adjustment p 7 p.65
- Led functions p 2 p.65
- Installing the media p 5 p27 setting method p 2 cleaning p 2 p.65
- Adjusting the ribbon p 9 p.65
- Troubleshooting p.65
- Setting the ribbon p 2 p.65
- Menu setting table p 3 p.65
- Specifications p.66
- Appendixes p.66
- Specifications p.67
- Appendixes p.67
- Unit mm inch p.68
- Specifications p.68
- Appendixes p.68
- Specifications p.69
- Appendixes p.69
- Signal line and pin arrangement p.70
- Serial interface p.70
- Interfaces p.70
- Appendixes p.70
- Specifications p.70
- Xon xoff protocol p.71
- Requirements to output x on code p.71
- Requirements to output the x off code p.71
- Interfaces p.71
- Dtr protocol p.71
- Appendixes p.71
- Specifications p.72
- Signal line and pin assignment table p.72
- Parallel interface p.72
- Interfaces p.72
- Appendixes p.72
- Note busy rises when strobe signal starts and data is latched with strobe signal starts p.73
- Interfaces p.73
- Compatible timing specification p.73
- Appendixes p.73
- While receiving data p.73
- When power is on time it goes off line p.73
- The status of a signal line will not be changed in bi directional mode such as nibble or ecp mode p.73
- Parallel port status signals when an error occurs p.73
- While receiving init signal p.74
- Relation of the timing of the busy signal and the ack signal p.74
- Note if the init signal does not have width of 10 to 15 µ sec or more it cannot act as an init signal if it is lower the init signal is ignored busy starts up when the init signal is perceived p.74
- Interfaces p.74
- Center ack p.74
- Appendixes p.74
- Usb interface p.75
- Specifications p.75
- Signal line and pin arrangement p.75
- Interfaces p.75
- Appendixes p.75
- Appendixes p.76
- Replacing the interface board p.76
- Replacement method p.76
- Caution p.76
- Appendixes p.77
Похожие устройства
-
Citizen CL-E720Command Reference DMX -
Citizen CL-E720Утилита для печати этикеток -
Citizen CL-E720Command Reference ZPL -
Citizen CL-E720Autocutter -
Citizen CL-E720Сетевые карты -
Citizen CL-S700Описание системы команд -
Citizen CL-S700Краткая инструкция -
Citizen CL-S700Брошюра -
Citizen CL-E720Руководство пользователя -
Citizen CL-E720Брошюра -
Epson TM-T20III C31CH51011Руководство по эксплуатации -
Mertech TLP100 Terra Nova 4588Руководство по эксплуатации