Loewe Articos 55 [24/40] Operating additional equipment
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Loewe Articos 55 [24/40] Operating additional equipment

Loewe Articos 55 [24/40] Operating additional equipment
24
Operating other Loewe equipment with
the RC2 remote control
You can operate various Loewe equipment with
this remote control. In the ex-factory state
Loewe equipment is set for TV, VCD, DVD, DVD-
Preceiver 8116DT (DVD/Audio), Certos (DEV1,
DEV2) which you can operate directly. The d-
box common in Germany is set for the Set Top
Box (STB).
Press the MOD button with
the display on.
The Mode menu is displayed.
Mark the equipment or the
equipment combination you
want to operate with the
rocker.
Press the SET button to accept
the setting.
In addition you can operate equipment
combinations, e.g. this TV and a DVD player or
VCR. The bottom six buttons then take over
drive functions for the DVD player or VCR. In
this case, you cannot operate the Digital
Recorder.
Switching over the remote control for
operating equipment of other
manufacturers
You can switch over the remote control for VCRs,
DVD players and Set Top Boxes if the infrared
code of the equipment type is listed in the code
list or is in the code memory of the RC2.
Switching over is done on the one hand by
entering a four-digit code and on the other hand
the remote control suggests codes which you
can test on the switched on equipment.
If you cannot find the equipment in the code list,
try to switch over the remote control with "Step
by set".
Switching over the remote control - with
code input
Look for the code number of your equipment in
the code list. The list is sorted according to
equipment type - DVD, VCR, STB - and
alphabetically according to manufacturer. You
will find one or more code numbers next to the
manufacturer name.
Press the MOD button with the
display on. The Mode menu is
displayed.
Mark >RC Setup< with the
rocker.
Press the SET button to call the
RC settings.
Mark the equipment type with
the rocker - VCR, DVD, STB,
DEV1 (device 1), DEV2 (device
2).
Call the Setup menu with the
SET button.
Mark "By code" with the
rocker.
Press the SET button to show
the Setup menu.
Enter the four-digit code from
the code list with the number
buttons.
First enter the type of
equipment for DEV1 and DEV2:
1 = DVD (DVD player)
2 = VCR (video recorder)
3 = STB (Set Top Box)
4 = Certos
then the four-digit code from
the code list.
When the first digit is
underscored again, check
whether your input was
correct. You can correct it by
re-entering.
Confirm the input with SET if it
is correct.
Exit the SETUP menu with
MOD.
You will see the Mode menu
with the equipment selection
again.
Select the device you have just programmed to
test the functionality. If the device cannot be
operated or is difficult to operate, repeat the
code input with the next code from the list. If
no other codes are specified, try a code
suggested by the remote control.
SET
MOD
– Mode –
>RC Setup<
TV
STB
DVD
SET
– RC Setup –
STB
DEV1
DEV2
HMM
SET
Setup DEV2
By code
Step and set
back
MOD
– Mode –
TV
STB
DVD
VCR
– Mode –
DVD
VCR
TV+DVD
TV+VCR
SET
Setup DEV2
Type/Code ?
* * * * *
Setup DVD
Code ?
* * * *
SET
MOD
– Mode –
>RC Setup<
TV
STB
DVD
Operating additional equipment
Setup DVD
Code ?
1 2 3 4
31599_021_Articos55_GB_(ro) 24.03.2004, 13:28 Uhr24

Содержание

Похожие устройства

Скачать