Gorenje KT05E [9/21] Cleaning maintenance and storage

USE

Switching on and off

• Press the button to switch the appliance on.

• In addition, the appliance is fitted with an auto shut-off function, which automatically switches off the

appliance after approximately two minutes.

Setting the tare weight

• Press the button to set the reading on the display to zero.

• When using the bowl, first put the empty bowl on the scales and press the button to set the reading on the

display to zero.

Setting the weighing unit

• The weighing unit can be set to (g), (lb).

• Button to change the unit of weight can be found on the bottom of scale.

Weighing

• Place the scales on a flat surface.

• Place the object to be weighed on the scales and read off the weight in the display.

• When using the bowl, first correct the tare as described above. Put the food to be weighed in the bowl,

place the bowl on the scales and read off the weight.

• If the weight exceeds the maximum capacity, the display will show “O-Ld”. To prevent damage to the

appliance, immediately remove the weight from the scales.

CLEANING, MAINTENANCE AND STORAGE

Before cleaning or maintenance, switch the appliance off.

• To clean the appliance, use only mild soap and a damp cloth.

• Do not use any abrasive or solvent-based cleaner.

Do not immerse any part of the appliance in water or any other liquid.

Checking and replacing the batteries

• If the display shows the batteries are too low and must be replaced.

• Periodically open the battery compartment and check the batteries for corrosion.

• To replace the batteries, open the battery compartment and remove the old batteries.

• Place new batteries, as indicated by the diagram inside the compartment.

• When disposing of batteries, follow the instructions given in the section “Protecting the environment”.

GORENJE WISHES YOU A LOT OF PLEASURE WHILE USING YOUR

APPLIANCE