MSI G43D3M DIGITAL [17/137] Important

En-8

MS-7526 Mainboard

10. Align the holes on the mainboard

with the heatsink. Push down the

cooler until its four clips get wedged

into the holes of the mainboard.

12.Turn over the mainboard to confirm

that the clip-ends are correctly

inserted.

9.Press down the load lever lightly onto

the load plate, and then secure the

lever with the hook under retention

tab.

Important

1. Read the CPU status in BIOS.

2. Whenever CPU is not installed, always protect your CPU socket pin with the

plastic cap covered (shown in Figure 1) to avoid damaging.

3. Mainboard photos shown in this section are for demonstration of the CPU/

cooler installation only. The appearance of your mainboard may vary depend-

ing on the model you purchase.

11.Press the four hooks down to fas-

ten the cooler. Then rotate the lock-

ing switch (refer to the correct di-

rection marked on it) to lock the

hooks.

locking

switch

Mainboard

Hook