Aten CS1922 [31/51] Keyboard language

Chapter 4. Hotkey Operation

Keyboard Language

To change the keyboard language, do the following:

1. Invoke HSM (see page 20).

2. Press [F6] [nn] [Enter].

Note: nn is a two-digit number that represents the keyboard language code

(US English: 33; French: 08; Japanese: 15; German: 09).

Hotkey Beeper

The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the

following:

1. Invoke HSM (see page 20

2. Press and release [B].

The Beeper toggles On or Off.

Port Switching Keys

To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),

do the

following:

1. Invoke HSM (see page 20 for details).

2. Press [X] [Enter].

Note: This procedure is a toggle. To enable the Port Switching keys, repeat

steps 1 and 2.

Firmware Upgrade Mode

To set the CS1922 / CS1924 to Firmware Upgrade Mode, do the following:

1. Invoke HSM (see page 20 for details).

2. Key in: upgrade

3. Press [Enter]. The front panel LEDs flash to indicate the upgrade has

started.

Note: To exit Firmware Upgrade Mode, you must power off the switch.