![MSI x99a xpower gaming titanium [2/129] Safety information](/img/pdf.png)
MSI x99a xpower gaming titanium [2/129] Safety information
2
Safety Information
Safety Information
y The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
y Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
y Hold the motherboard by the edges to avoid touching sensitive components.
y It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
y Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
y Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
y Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
y If you need help during any installation step, please consult a certified computer
technician.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
y Keep this user guide for future reference.
y Keep this motherboard away from humidity.
y Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
y Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
y All cautions and warnings on the motherboard should be noted.
y If any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user
guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
y Do not leave this motherboard in an environment above 60°C (140°F), it may damage
the motherboard.
Содержание
- Unpacking 1
- Safety information 2
- Preparing tools and components 3
- Quick start 3
- Installing a processor 4
- Installing ddr4 memory 5
- Connecting the front panel header 6
- Hdd led 6
- Hdd led hdd led hdd led 6
- Http youtu be dpelidvnzui 6
- Power led power led power led 6
- Installing the motherboard 7
- Installing sata drives 8
- Installing a graphics card 9
- Connecting peripheral devices 10
- Connecting the power connectors 11
- Power on 12
- Block diagram 23 13
- Contents 13
- Overview of components 28 13
- Quick start 3 13
- Rear i o panel 24 13
- Safety information 2 13
- Specifications 16 13
- Unpacking 1 13
- Bios setup 59 14
- Debug code led 56 14
- Led status indicators 55 14
- Software description 86 14
- Raid configuration 120 15
- Regulatory notices 126 15
- Troubleshooting 125 15
- Specifications 16
- Block diagram 23
- Audio ports 24
- Audio ports channel 24
- Audio ports configuration 24
- Clear cmos 24
- Connected blank empty 24
- Lan port led status table 24
- Link activity led 24
- Optical s pdif out 24
- Ps 2 lan 24
- Rear i o panel 24
- Rp sma 24
- Speed led 24
- Usb 2 bios flashback 24
- Usb 3 gen1 usb 3 gen2 type c 24
- Usb 3 gen2 24
- Y bios flashback port please refer to page 61 for updating bios with bios flashback 24
- Y clear cmos button power off your computer press and hold the clear cmos button for about 5 10 seconds to reset bios to default values 24
- Auto popup dialog 25
- Realtek hd audio manager 25
- Audio input 26
- Audio jacks to 7 channel speakers diagram 26
- Audio jacks to headphone and microphone diagram 26
- Audio jacks to stereo speakers diagram 26
- Rear i o panel 26
- Installing antennas 27
- Overview of components 28
- Component contents 29
- Cpu socket 30
- Important 30
- Introduction to the lga 2011 3 cpu 30
- Dimm slots 31
- Memory module installation recommendation 31
- Overview of components 31
- Important 32
- For 28 lanes cpus 33
- For 40 lanes cpus 33
- Graphics card slot empty slot best combination 33
- Important 33
- Pci_e1 6 pcie expansion slots 33
- Pci_e1 pcie 3 x16 33
- Pci_e2 pcie 3 x8 33
- Pci_e3 pcie 3 x8 33
- Pci_e4 pcie 3 x16 33
- Pci_e5 pcie 2 x1 33
- Pci_e6 pcie 3 x4 x8 33
- Pcie bandwidth tables 33
- Y for a single pcie x16 expansion card installation with optimum performance using the pci_e1 slot is recommended 33
- Y y if you install a large and heavy graphics card you need to use a tool such as msi gaming series graphics card bolster to support its weight to prevent deformation of the slot 33
- Y y when adding or removing expansion cards always turn off the power supply and unplug the power supply power cable from the power outlet read the expansion card s documentation to check for any necessary additional hardware or software changes 33
- Multiple graphics cards installation recommendation 34
- Installing sli graphics cards 35
- Pegsw1 pcie ceasefire switch 35
- Important 36
- Sata1 10 sata 6gb s connectors 36
- Se1_65 satae connectors 36
- Important 37
- Installing m module 37
- M2_1 m slot key m 37
- Video demonstration 37
- Installing u ssd 38
- U2_1 u connector 38
- Video demonstration 38
- Important 39
- Se usb switch with examples of various combination possibilities 39
- Se_usb_sw1 se usb switch 39
- Overview of components 40
- Xpci_e6 device 10xsata hdds 1xpci_e6 device 8xsata hdds 1xsatae hdd 40
- Xu ssd 10xsata hdds 40
- Xu ssd 1xm sata ssd 8xsata hdds 1xu ssd 1xm pcie ssd 8xsata hdds 40
- Xu ssd 8xsata hdds 1xsatae hdd 40
- Jusb4 usb devices 1xpci_e6 device jusb4 usb devices 1xm pcie ssd 41
- Jusb4 usb devices 1xu ssd 41
- Overview of components 41
- Xpci_e6 device 1xm sata ssd 8xsata hdds 1xpci_e6 device 1xm pcie ssd 8xsata hdds 41
- Oc1 game boost knob 42
- Using game boost knob 42
- Important 43
- Slow_1 jslow_1 slow mode booting switch jumper 43
- Important 44
- Jpwr1 4 power connectors 44
- Make sure that all the power cables are securely connected to a proper atx power supply to ensure stable operation of the motherboard 44
- These connectors allow you to connect an atx power supply 44
- Important 45
- Jfp1 jfp2 front panel connectors 45
- Jusb3 4 usb 3 gen1 connectors 45
- Note that the power and ground pins must be connected correctly to avoid possible damage 45
- These connectors allow you to connect usb 3 gen1 ports on the front panel 45
- These connectors connect to the switches and leds on the front panel 45
- Charger port 46
- Important 46
- Usb5 usb 3 gen1 type c connector 46
- Video demonstration 46
- Important 47
- Jtpm1 tpm module connector 47
- Jusb1 2 usb 2 connectors 47
- Super charger utility 47
- These connectors allow you to connect usb 2 ports on the front panel 47
- This connector is for tpm trusted platform module please refer to the tpm security platform manual for more details and usages 47
- Y note that the vcc and ground pins must be connected correctly to avoid possible damage 47
- Y y in order to recharge your ipad iphone and ipod through usb ports please install ms 47
- Both methods offer gradient points of the fan speed that allow you to adjust fan speed in relation to cpu temperature 48
- Controlling the fan speed 48
- Cpufan1 sysfan1 3 optfan1 2 pumpfan1 fan connectors 48
- Fan connectors can be classified as pwm pulse width modulation mode and voltage mode pwm mode fan connectors provide constant 12v output and adjust fan speed with speed control signal voltage mode fan connectors control fan speed by changing voltage therefore when you plug a 3 pin non pwm fan to a pwm mode fan connector the fan speed will be always maintained at 100 and that could be noisy 48
- Hardware monitor the other is to use command center application 48
- Pwm mode fan connector 48
- Voltage mode fan connector 48
- Fv1 v check points connectors 49
- Jaud1 front audio connector 50
- Jci1 chassis intrusion connector 50
- Resetting the chassis intrusion warning 50
- Using chassis intrusion detector 50
- Bios_sw1 multi bios switch 51
- Important 51
- Recovering bios 51
- Disch1 discharge button 52
- Jbat1 clear cmos reset bios jumper 52
- Resetting bios to default values 52
- Flashb1 bios flashback button 53
- Power1 reset1 power button reset button 53
- Sw tact1 2 blkoc_sel1 plus minus button bclk ratio switch 53
- Important 54
- Jled1 rgb led connector 54
- Oc_rt1 oc_fs1 oc retry button oc force enter bios button 54
- Led status indicators 55
- Led status table 55
- 2 3 4 5 6 7 8 9 a b c d e f 56
- Boot phases 56
- Debug code led 56
- Debug code led table 56
- Hexadecimal character table 56
- Debug code led 57
- Dxe progress codes 57
- Pei error codes 57
- Acpi states codes 58
- Cpu temperature 58
- Dxe error codes 58
- Recovery error codes 58
- Recovery progress codes 58
- S3 resume error codes 58
- S3 resume progress codes 58
- The following codes appear after booting and the operating system into acpi modes 58
- Bios setup 59
- Entering bios setup 59
- Function key 59
- Important 59
- Resetting bios 60
- Updating bios 60
- Updating bios with m flash 60
- Updating the bios with live update 6 60
- Important 61
- Updating bios with bios flashback 61
- Ez mode 62
- Important 63
- Advanced mode 64
- Advanced 65
- Important 65
- Settings 65
- System status 65
- Important 69
- Important 71
- Security 71
- Save exit 72
- Important 73
- Important 75
- M flash 83
- Oc profile 84
- Hardware monitor 85
- Important 85
- Installing drivers 86
- Installing utilities 86
- Installing window 86
- Installing windows 7 8 10 86
- Software description 86
- Command center 87
- Cpu frequency 87
- Important 87
- Profile buttons 87
- Cpu fan 88
- Cpu voltage 88
- Dram frequency dram voltage 88
- Igp frequency gt voltage 88
- Game boost 89
- Option buttons advanced 89
- Option buttons setting 89
- Gadget mode 90
- Option buttons information 90
- Live update 6 91
- Updating the system 91
- Total installer 92
- Gaming app 93
- Important 94
- Led effect 94
- Osd setting panel 94
- Dragon eye 95
- Eye rest 96
- Vr ready 96
- Gaming hotkey 97
- Important 97
- Mouse master 98
- M cloud 99
- Important 100
- Installing cloud storage 100
- Setting up soft ap optional 100
- Important 101
- Managing user accounts 101
- Transferring files 101
- Creating a ram disk 102
- Ramdisk 102
- Important 103
- Usb speed up 103
- Configuring bandwidth 104
- Gaming lan manager 104
- Important 104
- Speed testing 105
- Audio tab 106
- Installation and update 106
- Nahimic 2 106
- Microphone tab 107
- Hd audio recorder 2 108
- Sound tracker 109
- Important 110
- Logging 110
- Registering an account 110
- System requirement 110
- Xsplit gamecaster v2 110
- Inside the xsplit gamecaster overlay 111
- Learning stream and record 111
- Tool tip 111
- Accounts tab 112
- Settings tab 112
- Hotkeys tab 113
- Important 113
- Recordings tab 113
- Extreme tuning utility 114
- Intel extreme tuning utility 114
- Configuration windows 115
- Steelseries engine 3 115
- Configuring your devices 116
- Tool tip 116
- Important 118
- Intel turbo boost max technology 3 application driver 118
- Turbo boost max technology 3 application driver 118
- Important 120
- Raid configuration 120
- Raid level comparison 120
- Rapid storage technology option rom 120
- Using inte 120
- Using intel rapid storage technology option rom 120
- Creating raid volume 121
- Important 121
- Delete raid volume 122
- Here you can delete the raid volume but please be noted that all data on raid drives will be lost 122
- If your system currently boots to raid and you delete the raid volume in the irst option rom your system will become unbootable 122
- Important 122
- Press y key to accept the volume deletion 122
- Raid configuration 122
- Reset disks to non raid 122
- Select option delete raid volume from the main menu screen and press enter key to select a raid volume for deletion then press delete key to delete the selected raid volume the following screen appears 122
- Select option reset disks to non raid from the main menu screen and press enter to delete the raid volume and remove any raid structures from the drives use the space key to select the disks and press enter key a confirmation sentence will appear below and then press y key to accept the selection 122
- Degraded raid array 123
- Important 123
- Missing hard drive member 123
- Recovery volume options 123
- Failed hard drive member 124
- Lost bios password 125
- The computer does not boot after updating the bios 125
- The power is not on 125
- The power is on but no signal to monitor 125
- The usb device is not working 125
- There is no audio 125
- There is no network 125
- Troubleshooting 125
- B 급 기기 가정용 방송통신기자재 126
- Battery information 126
- C tick compliance 126
- Ce conformity 126
- Chemical substances information 126
- Fcc compliance statement 126
- Regulatory notices 126
- Wireless radio use 126
- クラス b 情報技術装置 126
- 無線設備警告聲明 126
- Regulatory notices 127
- Weee waste electrical and electronic equipment statement 127
- Environmental policy 128
- India rohs 128
- Regulatory notices 128
- Türkiye eee yönetmeliği 128
- Vi ệ t nam rohs 128
- Україна обмеження на наявність небезпечних речовин 128
- 日本 jis c 0950 材質宣言 128
- Copyright 129
- Regulatory notices 129
- Revision history 129
- Technical support 129
- Trademark recognition 129
- 产品中有害物质的名称及含量 129
Похожие устройства
- MSI gs40 6qe-233ru phantom, 9s7-14a112-233 Инструкция по эксплуатации
- MSI gs40 6qe-091ru phantom, 9s7-14a112-091 Инструкция по эксплуатации
- MSI gs40 6qe-234ru phantom, 9s7-14a112-234 Инструкция по эксплуатации
- MSI h110m pro-vhl Инструкция по эксплуатации
- MSI rx 480 gaming x 8g, rx 480, 8гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1060, gtx 1060 6gt oc, 6гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1060, gtx 1060 armor 6g, 6гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1060, gtx 1060 armor 6g oc, 6гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1060, gtx 1060 gaming 6g, 6гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1060, gtx 1060 gaming x 6g, 6гб, gddr5, retail Инструкция по эксплуатации
- MSI ap16 flex-021ru, 9s6-a62213-021 Инструкция по эксплуатации
- MSI geforce gtx 1070, gtx 1070 founders edition, 8гб, gddr5, retail Инструкция по эксплуатации
- MSI rx 480 8g, rx 480, 8гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1070, gtx 1070 sea hawk, 8гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1070, gtx 1070 gaming 8g, 8гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1080, gtx 1080 sea hawk, 8гб, gddr5x, retail Инструкция по эксплуатации
- MSI geforce gtx 1080, gtx 1080 gaming 8g, 8гб, gddr5x, retail Инструкция по эксплуатации
- MSI geforce gtx 1080, gtx 1080 sea hawk ek, 8гб, gddr5x, retail Инструкция по эксплуатации
- MSI geforce gtx 1070, gtx 1070 sea hawk ek x, 8гб, gddr5, retail Инструкция по эксплуатации
- MSI geforce gtx 1070, gtx 1070 aero 8g, 8гб, gddr5, retail Инструкция по эксплуатации
Скачать
Случайные обсуждения