Vitek VT-2451 BK [12/68] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2451 BK [12/68] English

Vitek VT-2451 BK [12/68] English
12
ENGLISH
switch on. When the temperature in the oven
cavity decreases, the cooking process will
resume and last until the preset cooking pro-
gram is finished.
2. If during the cooking program operation the
temperature didn’t reach the preset value,
you will hear sound signals and the symbols
E02 will appear on the display (8). Press the
“Stop/Cancel” button (13) to stop the cook-
ing process.
3. The symbols E03 on the display (8) mean that
the temperature sensor works improperly,
switch the oven off and apply to any autho-
rized service center at the contact address
list given in the warranty certificate and on the
website www.vitek.ru.
CLEANING AND CARE
Clean the unit regularly. Absence of due care
may may affect the unit operation, cause
wear of the unit surfaces and create a haz-
ard to the user.
• Before cleaning, switch the unit off and unplug it.
• Provide that moisture does not get on the
unit’s control panel, clean it with a soft, slightly
damp cloth and then wipe it dry.
• Keep the oven cavity clean. When food rem-
nants or splatters stick to the unit walls,
remove them with a damp tissue.
• If the cavity is too dirty, you may use a soft
detergent.
• Do not use abrasives and metal brushes to
clean inner and outer surfaces of the oven.
Provide that no water or detergent gets into
the air and steam outlets located on the unit
body and lid.
• Do not use ammonia-based detergents.
• Wipe the unit’s outer surface with a clean,
slightly damp cloth.
• Keep the oven door clean. Provide that no
crumbs and food remnants accumulate bet-
ween the door and the front panel of the
oven as it prevents the door from normal
closing.
• Regularly remove dust and dirt from the venti-
lation openings on the oven body, which serve
for cooling air intake.
• Regularly take out and clean the glass rotary
bottom plate and the roller support, wipe the
bottom of the oven cavity.
• Wash the glass bottom plate and the roller
support in warm water with a neutral deter-
gent. You can wash these parts in a dishwash-
ing machine.
• Do not immerse the heated glass rotary bot-
tom plate into cold water: the glass plate can
splinter due to extreme temperature differ-
ence.
TROUBLES AND TROUBLESHOOTING
The unit creates interference
in the reception of TV and radio
signals
During operation of the unit, interference in the reception of
TV and radio signals can appear. Similar interference appears
during operation of small electrical appliances such as a mixer,
a vacuum cleaner and a hairdryer. It is normal.
Dim lighting Oven cavity lighting can be low when low microwave power level
has been set. It is normal.
Steam accumulation on the
door, hot air output from the
ventilation openings.
During cooking, steam can come out from the products. Most
of the steam comes out through the ventilation openings, but
some part of it can accumulate on the inner side of the door.
It is normal.
The microwave oven has been
switched on without food inside.
Switching the unit on without food for a short time does not
cause its damage. Always make sure that there are food
products in the unit before switching it on
Troubleshooting
Failure Possible reason Solution
The unit cannot be
switched on
The power cord plug is not
properly inserted in the socket
Pull the plug out of the socket. After 10
seconds insert the plug into the socket again
Malfunction of the electric socket
Try to connect another unit to the same
socket
IM VT-2451.indd 12 30.11.2016 14:29:49

Содержание

Похожие устройства

Скачать