Vitek VT-1525 BK [8/44] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1525 BK [8/44] English

Vitek VT-1525 BK [8/44] English
8
ENGLISH
Untimely descaling, as well as non-observance
of these instructions and mishandling the coffee
maker are not covered by warranty.
•
Prepare a citric acid solution (2 tea spoons per
1 liter of water).
•
Make sure that the buttons (12, 13) are not
pressed and the steam supply knob (15) is in the
position “-”.
•
Place a suitable bowl on the tray grid (2) and
under the cappuccinator pipe (18).
•
Pull the removable water tank (16), disconnect
it from the unit and fill with citric acid solution till
the maximal mark «MAX». After that install the
water intake pipe (20) into the tank and install
the removable tank (16) back to its place.
•
Perform the actions described in the chapter
«Preheating».
1.
Insert the power plug into the mains socket.
Press the button
(9) to switch the coffee
maker on, the indicator (8) will light up red. Press
the button
(12). Make sure that the button
(13) is not pressed. Wait until water is delivered
from the outlet openings of the filter holder (5)
and then stop the water supply by pressing the
button
(12). Wait for some time until the cof-
fee maker heating starts.
2.
Wait until the ready indicator (14) lights up green.
It means that the heating is over. Press the but-
ton
(12) and wait until the bowl is filled with
approximately 100 ml of water. Stop the water
supply by pressing the button
(12) and wait
for 5 seconds.
3.
Press the steam supply button (13) and wait
until the ready indicator (14) lights up green.
Switch the steam supply on by setting the
knob (15) to the position «+». Wait for 2 minutes
and switch the steam supply off by setting the
knob (15) to the position «-». Press the button
(9) and leave the coffee maker filled with the
citric acid solution for 15 minutes.
4.
Repeat steps 1-3 at least 3 times.
5.
Press the button (13) (the button is released).
Wait until the ready indicator (14) lights up green.
Press the button
(12) and wait until all the
solution is poured out.
6.
Fill the removable tank (16) with clear cold water
and repeat the steps 1-3 no less than 3 times
(there’s no need to wait for 15 minutes as
described in the step 3). Wait until all the water
is in the bowl.
7.
To make sure that the water supply system and
the cappuccinator pipe are clean, repeat the
step 7 at least 3 times.
8.
Switch the coffee maker off by pressing the but-
ton (9).
Notes: To remove the scale you can use spe-
cial descaling agents for coffee makers and cof-
fee machines, strictly following the instructions on
their usage.
CLEANING
•
If during the filter (6) cleaning you find out that
the openings are blocked with ground cof-
fee remnants, you can clean them with a small
brush.
•
Clean the coffee maker body with a soft damp
cloth, and then wipe the unit body dry. Do not
use metal brushes or abrasives.
•
Never immerse the coffee maker body into
water or other liquids.
•
Wash the removable parts of the coffee maker
with warm water and a soft detergent, then rinse
them and dry.
Drip tray
•
Remove the grid (2) from the tray (1) and pour
out water, wash the tray and put it back to its
place, put the grid on the tray.
STORAGE
•
Clean the coffee maker before taking it away for
long storage.
•
Do not store the coffee maker at temperatures
below 0°C.
•
Keep the coffee maker away from children in a
dry cool place.
TROUBLES AND TROUBLESHOOTING
Problem Cause Solution
The unit can’t be
switched on
No voltage in the mains
socket.
Make sure that the socket is properly
operating.
The power plug is not
completely inserted into the
socket.
Check whether the plug is completely
inserted into the socket.
IM VT-1525.indd 8 25.04.2016 15:17:59

Содержание

Похожие устройства

Скачать