Ryobi one+ obl1802 3000731 [11/140] English original instructions

Ryobi one+ obl1802 3000731 [11/140] English original instructions
8
English (original instructions)
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
SPECIFICATIONS
Product Specifications
Model OBL1802
Motor 18 V DC
Air Velocity 190 km/h
Measured sound
pressure level
L
pA
:83 dB(A), K
pA
:2 dB(A)
Measured sound
power level
L
WA
:93.7 dB(A), K
WA
:2.0dB(A)
Vibration ah:1.57 m/s² , K=1.5 m/s²
Weight 1.5 kg
Battery Pack
(not included):
BPP-1817M / BPP-1815M /
ABP1801 / BPP-1817MG /
ABP1802 / BPL-1820 /
BPL-1820G / BPL-1815
Charger
(not included):
BC-1800 / BC-1815S / BCL1418
/ ACR-1800 / BC-1800M /
BC-1800SMG / BCL-1800 /
BCL-1800G
FEATURES
DESCRIPTION
1. Blower housing outlet
2. Power switch
3. Blower tube
4. Latches
5. Battery pack (Not included)
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding
of the information on the blower and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
ASSEMBLY
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the blower when assembling parts.
ASSEMBLING THE BLOWER TUBE
See Figure 2.
With the logo area facing up, slide the blower tube
over the outlet on the blower housing.
Press down on the tab on the blower housing outlet.
Push tab on outlet on the blower housing down until
it locks into place through the opening in the blower
tube.
OPERATION
WARNING
Do not allow familiarity with tools to make you careless
Remember that a careless fraction of a second is
sufficient to inflict serious injury.
INTENDED USE
You may use this tool for the purposes listed below:
Clearing hard surfaces such as driveways and
walkways.
Keeping decks and driveways free from leaves and
pine needles.
WARNING
Not intended for use other than what is listed above.
TO INSTALL BATTERY PACK
See Figure 3.
Place the power switch in the OFF ( O ) position.
Place the battery pack in the blower. Align raised rib on
battery pack with groove in the blower’s battery port.
Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
blower before beginning operation.
CAUTION
When placing battery pack in the blower, be sure
raised rib on battery pack aligns with the back of the
blower and latches into place properly. Improper
installation of the battery pack can cause damage to
internal components.
TO REMOVE BATTERY PACK
See Figure 3.
Place the power switch in the OFF ( O ) position.
Locate latches on side of battery pack and depress
both sides to release battery pack.
Remove battery pack from the blower.

Содержание

Похожие устройства

English original instructions SPECIFICATIONS ASSEMBLING THE BLOWER TUBE See Figure 2 Product Specifications Model OBL1802 With the logo area facing up slide the blower tube over the outlet on the blower housing Motor 18 V DC Press down on the tab on the blower housing outlet Air Velocity 190 km h Measured sound pressure level LpA 83 dB A KpA 2 dB A Push tab on outlet on the blower housing down until it locks into place through the opening in the blower tube Measured sound power level LWA 93 7 dB A vA 2 0dB A Vibration ah 1 57 m s2 K 1 5 m s2 Weight 1 5 kg Battery Pack not included BPP 1817M BPP 1815M ABP1801 BPP 1817MG ABP1802 BPL 1820 BPL 1820G BPL 1815 INTENDED USE Charger not included BC 1800 BC 1815S BCL1418 ACR 1800 BC 1800M BC 1800SMG BCL 1800 BCL 1800G Keeping decks and driveways free from leaves and pine needles OPERATION A WARNING Do not allow familiarity with tools to make you careless Remember that a careless fraction of a second is sufficient to inflict serious injury You may use this tool for the purposes listed below Clearing hard walkways surfaces such as driveways and A WARNING Not intended for use other than what is listed above FEATURES DESCRIPTION TO INSTALL BATTERY PACK 1 Blower housing outlet 2 Power switch 3 Blower tube 4 Latches 5 Battery pack Not included See Figure 3 Place the power switch in the OFF O position Place the battery pack in the blower Align raised rib on battery pack with groove in the blower s battery port KNOW YOUR BLOWER Make sure the la tches on each side of the battery pack snap in place and that battery pack is secured in the blower before beginning operation See Figure 1 The safe use of this product requires an understanding of the information on the blower and in this operator s manual as well as a knowledge of the project you are attempting Before use of this product familiarize yourself with all operating features and safety rules A CAUTION When placing battery pack in the blower be sure raised rib on battery pack aligns with the back of the blower and latches into place properly Improper installation of the battery pack can cause damage to internal components BLOWER TUBE The blower tube can be installed on the blower without using any tools TO REMOVE BATTERY PACK A WARNING See Figure 3 To prevent accidental starting that could cause serious personal injury always remove the battery pack from the blower when assembling parts Place the power switch in the OFF O position Locate latches on side of battery pack and depress both sides to release battery pack Remove battery pack from the blower 8

Скачать