Brother Boutique 27 [93/111] Optional accessories

USING ATTACHMENTS AND APPLICATIONS

HEFTEN UND APPLIZIEREN

ИСПОЛЬЗОВАНИЕ ПРИСПОСОБЛЕНИЙ И ИЗГОТОВЛЕНИЕ АППЛИКАЦИЙ

OPTIONAL ACCESSORIES

Using the Spring-action

Quilting Foot

Pattern Stitch Length Stitch Width Feed Dog

(Straight Stitch)

Any 3.5 (center) Down position

The Spring -action Quilting Foot is useful for darning and freemotion

machine quilting.

1. Remove the power supply plug from the outlet.

2. Raise the needle and the presser foot.

3. Loosen the presser foot screw to remove the presser foot holder.

(See fig. A)

4. Attach the quilting foot, making sure that part indicated by A in

the illustration is above the needle clamp screw, then lower the

Presser Foot Lever and tighten the presser foot screw.

* Be sure that the needle clamp screw is firmly tightened.

(See fig. B)

1 Use a screwdriver.

2 Presser Foot Screw

3 Needle Clamp Screw

CAUTION

• Be careful not to touch the needle during this time,

otherwise injury may result.

• Use the screwdriver to tighten the presser foot holder

screw securely. If the screw is loose, the needle may

strike the presser foot and cause injury.

• Be sure to turn the balance wheel toward the front of the

machine to check that the needle does not strike the

presser foot. If the needle strikes the presser foot, injury

may result.

5. Lower the feed dogs by setting the Feed Dog Position Switch to

the Down Position as shown on page 30.

6. Set the Pattern Selection Dial to Straight Stitch.

* Before starting to sew, draw the quilting design on the fabric.

7. Use both hands to keep the fabric firmly stretched and move the

fabric to sew over the drawn design. (See fig. C)

B Quilting design (Line)

8. The stitch length depends on how quickly the fabric is moved

and on the machine’s sewing speed. Sew slowly and move the

fabric at a constant speed to sew uniform stitches. (See fig. D)

(Model STAR 240E, STAR 230E)