Dometic MSI 924 [19/432] Connecting the inverter to the battery

SinePower Connecting the inverter

• Keep to the specified cable cross section and fit a cable fuse (fig. 8 3, page 5)

as close to the battery as possible on the positive cable (see the table).

9.2 Connecting the inverter to the battery

➤ Set the main switch (fig. 6 1, page 4 and fig. 7 1, page 5) to “OFF”.

➤ Loosen the screw (fig. 8 1, page 5) from the red positive terminal (fig. 8 2,

page 5).

➤ Push the cable lug (fig. 8 2, page 5) of the positive cable into the red positive

terminal and fasten it with the screw.

➤ Connect the negative cable to the black negative terminal (fig. 8 4, page 5).

➤ Lay the positive cable from the inverter to the positive terminal of the vehicle

battery and connect it.

➤ Lay the negative cable from the inverter to the negative terminal of the vehicle

battery and connect it.

➤ Connect the earth terminal to the vehicle chassis.

Device

Required cable

cross section

Cable fuse

(fig. 8 3, page 5)

MSI912 25 mm² 115 A

MSI924 25 mm² 75 A

MSI1312 35 mm² 170 A

MSI1324 35 mm² 85 A

MSI1812/MSI1812T 35 mm² 228 A

MSI1824/MSI1824T 35 mm² 115 A

NOTE

Tighten the nuts and bolts to a maximum torque of 12 – 13 Nm. Loose

connections may cause overheating.

MSI900-1800--IO-16s.book Seite 19 Montag, 15. August 2016 1:50 13