Home
Главная
Yamaha
NS-B700 Piano White
Инструкция по эксплуатации Страница: 4

Yamaha NS-B700 Piano White [4/28] How to connect

2 En

Before making connections, make sure that the amplifier is

switched off.

• Connect the screw-type input terminals at the rear of the

speakers to the speaker output terminals of the amplifier (or

receiver) with the speaker cable.

• Connect the (+) terminals on the amplifier (or receiver) to the

(+) terminal of each speaker, making sure to confirm the color-

coded wire of the cable at each end. Use the other wire of the

cable to connect the (-) terminals of the components.

• Connect one speaker to the left (marked L) terminals of your

amplifier, and another speaker to the right (marked R)

terminals, making sure not to reverse the polarity (+, -). If one

speaker is connected with reversed polarity the sound will be

unnatural and lack bass.

■ How to connect

1 Loosen the knob.

2 Remove 10 mm (3/8”) of insulation from each end of the

cables, and twist the exposed conductors together neatly and

tightly, as shown below.

3 Insert the bare wire.

4 Tighten the knob and secure the cables.

Test the firmness of the connection by pulling lightly on the

cables at the terminal.

Notes

• Do not let the bare speaker wires touch each other as this

could damage the speaker or the amplifier, or both.

• Do not insert the insulation into the hole. Sound may not be

produced.

■ When using a banana plug

Note

Do not take off this cover unless using a banana plug.

1 Remove the cover by pulling it toward you.

2 Tighten the terminal knob.

3 Simply insert the banana plug into the terminal.

CONNECTIONS TO YOUR

AMPLIFIER

SPEAKERS

–

Loosen

Black (–)

Insulation

coating

Tighten

Red (+)

Bare wire

NS-B700

Speakers output

terminals of the

amplifier (or receiver)

Amplifier or

Receiver

NS-B700

Good No Good

10 mm

(3/8 ”)

Banana plug

Cover

Yamaha NS-B700 Piano White [4/28] How to connect

Содержание

Похожие устройства