![Sony SLV-E180EE [39/48] Troubleshooting continued](/img/pdf.png)
Sony SLV-E180EE [39/48] Troubleshooting continued
![Sony SLV-E180EE [39/48] Troubleshooting continued](/views2/1029765/page39/bg27.png)
38
Additional Information
Troubleshooting (continued)
Symptom
No TV programme appears
on the TV screen.
TV reception is poor.
The tape starts playing as soon
as it is inserted.
The tape is ejected when you
press r REC.
Nothing happens when you
press r REC.
The timer does not operate.
Remedy
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Adjust the TV aerial.
• Make sure the TV system (B/G or D/K) is set to the
system in your area.
• The safety tab has been removed. To record on this
tape, cover the tab hole.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Select the correct source with the INPUT SELECT or
PROG +/– buttons. Select a programme position
when recording TV programmes; select “L” (“L1” or
“L2” for SLV-E380EE) when recording from other
equipment.
• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer
recording.
• Make sure your timer settings have not already passed
the current time.
• The clock stops if the VCR is disconnected from the
mains for more than an hour. Reset the clock and timer.
Timer recording Recording
Содержание
- E f g h i j k 1
- T u v w x y z 1
- Operating instructions 2
- Slv e480ee slv e380ee slv e180ee 2
- Video cassette recorder 2
- Caution 3
- Compatible colour systems 3
- Installing 3
- Introduction 3
- Precautions 3
- Safety 3
- Warning 3
- Additional information 4
- Additional operations 4
- Basic operations 4
- Getting started 4
- Table of contents 4
- Checking your model name 5
- Step 1 5
- Unpacking 5
- Inserting the batteries 6
- Setting up the remote commander 6
- Step 2 6
- Using the remote commander 6
- Step 2 setting up the remote commander continued 7
- Tv control buttons 7
- Connecting the vcr 8
- Step 3 8
- Step 4 9
- Tuning your tv to the vcr 9
- Setting up the vcr with the auto set up function 11
- Step 5 11
- Getting started 12
- To cancel the auto set up function press auto set up 12
- Setting the clock 13
- Step 6 13
- Manual setup selecting a language 15
- Manual setup presetting channels 16
- Manual setup presetting channels continued 17
- Press prog to select the programme position 17
- Press repeatedly until the channel you want is displayed 17
- The channels appear in the following order 17
- To move the cursor to system then select b g or d k so that you get the better sound 17
- Disabling unwanted programme positions 18
- If the picture is not clear 18
- Insert a tape 19
- Playing a tape 19
- Press æ play 19
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 19
- Turn on your tv and set it to the video channel 19
- When the tape reaches the end it will rewind automatically 19
- Additional tasks 20
- Basic operations 20
- During playback press replay up to four times the vcr rewinds the tape about 10 seconds on the counter for each press of the button and restarts playback 20
- To display the counter on the tv screen press display 20
- To play an ntsc recorded tape set ntsc pb at the rear of the vcr according to the colour system of your tv 20
- To replay a recently watched scene you can immediately rewind and play back the scene you want to watch again 20
- To use the time counter at the point the tape that you want to find later press counter reset the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 20
- Playing a tape continued 21
- Basic operations 22
- Insert a tape with its safety tab in place 22
- Press input select until a programme position number appears in the display window 22
- Recording tv programmes 22
- Turn on your tv and set it to the video channel 22
- Recording tv programmes continued 23
- Basic operations 24
- To save a recording to prevent accidental erasure break off the safety tab as illustrated to record on a tape again cover the tab hole with adhesive tape 24
- To watch another tv programme while recording select another programme position on the tv 24
- Recording tv programmes using the timer 25
- Keep the satellite tuner turned on until the vcr finishes recording the satellite programme for which you have made a timer setting 27
- On the satellite tuner select the satellite programme for which you want to make a timer setting 27
- Recording tv programmes using the timer continued 27
- Reset the counter display tape information on the tv screen check the timer settings watch another tv programme 27
- To change the indication in reverse order 27
- To record satellite broadcasts if you connect the satellite tuner and the vcr you can record satellite programmes 27
- To use the vcr after setting the timer to use the vcr before a timer recording begins just press on standby the indicator turns off and the vcr switches on remember to press on standby to reset the vcr after using the vcr 27
- Turn on the satellite tuner 27
- You can also do the following tasks while the vcr is recording 27
- Playing searching at various speeds 28
- To resume normal playback press æ play 28
- During playback or pause turn the click shuttle ring clockwise or anticlockwise each change in the click shuttle ring position changes the playback mode in the following way 29
- Playing searching at various speeds continued 29
- Using the click shuttle ring slv e380ee only 29
- With the click shuttle ring you can operate a variety of playback options 29
- Recording tv programmes using the quick timer 30
- Using the quick timer during stop mode 30
- Before you start turn on your tv and set it to the video channel 31
- Checking changing cancelling timer settings 31
- If you do not need to change or cancel the settings press ok then turn off the vcr to return to recording standby 31
- If you want to change a setting go on to the next step 31
- Press on standby to turn on the vcr 31
- To select list and press ok 31
- To select the setting you want to change or cancel then press ok 31
- About optimum picture control opc 33
- Adjusting the picture 33
- Adjusting the tracking 33
- Changing menu options 34
- Changing menu options continued 35
- Video options 35
- Editing with another vcr 36
- How to connect to record on this vcr 36
- Before you start editing turn on your tv and set it to the video channel press input select or prog to display l l1 or l2 for slv e380ee in the display window press sp lp to select the tape speed sp or lp slv e480ee only 37
- Editing with another vcr continued 37
- Insert a source tape with its safety tab removed into the other playback vcr search for the point to start playback and set it to playback pause 37
- Insert a tape with its safety tab in place into this recording vcr search for the point to start recording and press p pause 37
- Operation when recording on this vcr 37
- Press r rec on this vcr and set it to recording pause 37
- To start editing press the p pause buttons on both vcrs at the same time 37
- To stop editing press the p stop buttons on both vcrs 37
- Symptoms caused by contaminated video heads 38
- Troubleshooting 38
- Troubleshooting continued 39
- Additional information 41
- General 41
- Inputs and outputs 41
- Specifications 41
- Supplied accessories 41
- System 41
- 2 3 5 4 42
- 9 8 7 6 42
- Front panel slv e480ee and slv e180ee 42
- Index to parts and controls 42
- 2 3 4 5 6 43
- Front panel slv e380ee 43
- Index to parts and controls continued 43
- Display window 44
- Index to parts and controls continued 45
- Rear panel 45
- 6 7 8 9 46
- Remote commander 46
- Index to parts and controls continued 47
Похожие устройства
- Xoro HSD 304 Инструкция по эксплуатации
- Makita GA9020 SF Инструкция по эксплуатации
- Levenhuk 870T тринокуляр Инструкция по эксплуатации
- Sony SLV-AV100UX Инструкция по эксплуатации
- Zanussi ZDS 699 Инструкция по эксплуатации
- Makita 9555 HN Инструкция по эксплуатации
- Levenhuk D870T тринокуляр Инструкция по эксплуатации
- Sony SLV-795HF Инструкция по эксплуатации
- Samsung WF6520S9C Инструкция по эксплуатации
- Levenhuk Rainbow 2L Blue Инструкция по эксплуатации
- Makita GD 0800 C Инструкция по эксплуатации
- Rolsen C21SR74S Инструкция по эксплуатации
- Sony SLV-761HF Инструкция по эксплуатации
- Siemens WM16Y890OE Инструкция по эксплуатации
- Levenhuk Rainbow 2L Pink Инструкция по эксплуатации
- Makita 9558 HN Инструкция по эксплуатации
- Sony SLV-760HFPX Инструкция по эксплуатации
- Olympus C-2 Инструкция по эксплуатации
- Makita 9566 CV Инструкция по эксплуатации
- Siemens WD 14H540 OE Инструкция по эксплуатации
Скачать
Случайные обсуждения
Ответы 0
Надо несколько раз пихать кассету чтобы забрал, вытаскивать тоже проблематично как быть?
2 года назад