Home
Главная
Makita
Дрель
DP2010
Инструкция по эксплуатации Страница: 5

Makita DP2010 [5/28] Maintenance

5 ENGLISH

Depth gauge (optional accessories)

► Fig.6: 1. Depth gauge 2. Washer 3. Clamp screw

Install the depth gauge on the tool with the clamp screw

and washer. Adjust the depth gauge to the desired

depth and tighten the clamp screw.

OPERATION

CAUTION:

• Always hold the tool only by the handle when

performing an operation.

► Fig.7

Drilling operation

Drilling in wood

When drilling in wood, the best results are obtained

with wood drills equipped with a guide screw. The guide

screw makes drilling easier by pulling the bit into the

workpiece.

Drilling in metal

To prevent the bit from slipping when starting a hole,

make an indentation with a center-punch and hammer

at the point to be drilled. Place the point of the bit in the

indentation and start drilling.

Use a cutting lubricant when drilling metals. The excep-

tions are iron and brass which should be drilled dry.

CAUTION:

• Pressing excessively on the tool will not speed

up the drilling. In fact, this excessive pressure

will only serve to damage the tip of your bit,

decrease the tool performance and shorten the

service life of the tool.

• There is a tremendous twisting force exerted

on the tool/bit at the time of hole breakthrough.

Hold the tool rmly and exert care when the bit

begins to break through the workpiece.

• A stuck bit can be removed simply by setting

the reversing switch to reverse rotation in order

to back out. However, the tool may back out

abruptly if you do not hold it rmly.

• Always secure small workpieces in a vise or

similar hold-down device.

• Avoid drilling in material that you suspect con-

tains hidden nails or other things that may cause

the bit to bind or break.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspec-

tion or maintenance.

• Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks

may result.

To maintain product SAFETY and RELIABILITY,

repairs, carbon brush inspection and replacement, any

other maintenance or adjustment should be performed

by Makita Authorized Service Centers, always using

Makita replacement parts.

OPTIONAL

ACCESSORIES

CAUTION:

• These accessories or attachments are recom-

mended for use with your Makita tool specied

in this manual. The use of any other accessories

or attachments might present a risk of injury to

persons. Only use accessory or attachment for

its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Drill bits

• Chuck key

• Chuck key holder

• Depth gauge

NOTE:

• Some items in the list may be included in the

tool package as standard accessories. They

may differ from country to country.

Makita DP2010 [5/28] Maintenance

Содержание

Похожие устройства