FIRST Austria FA-5480 [2/14] Using methods

FIRST Austria FA-5480 [2/14] Using methods
2 3
IMPORTANT SAFEGUARDS
When using your Coffee Mill, basic safety
precautions should always be followed,
including the following:
1. Read all instructions carefully.
2. This coffee mill may only be connected to
the same main voltage as shown on the
rating plate.
3. To protect against risk of electrical shock,
do not immerse or rinse housing, cord or
plug in water or other liquid.
4. Close supervision is necessary when any
appliance is used near children.
5. Unplug from outlet when not in use,
before putting on or taking off parts and
before cleaning.
6. Do not contact any moving parts while
the appliance is operating.
7. Container must be properly in place
before operating the coffee mill.
8. Do not to use the water clean the coffee
mill, Please use a brush to extricate food
only when the coffee mill is not operating.
9. Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions or is dropped
or damaged in any manner. Take the
product to an authorized and qualied
service facility for examination, repair, or
electrical or mechanical adjustment.
10. The use of attachment not recommended
or sold by the appliance manufacturer
may cause re, electric shock or injury.
11. Do not use outdoors. Only household use
12. Do not let cord hang over edge of table or
counter or touch hot surface.
13. Always place parts in the coffee mill
before you connect it to the mains.
14. Switch off the appliance before changing
accessories or approaching parts which
move in use.
15. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
16. ALLOW THE BLADE TO STOP
ROTATING BEFORE REMOVEING THE
LID.
SAVE THESE INSTRUCTIONS
GENERAL DESCRIPTION (g. A)
A. Lid
B. Coffee bean container
C. Motor
D. Base
E. Feet
F. Grinding control knob
G. Timer switch
H. Knob
I. Coffee powder container
J. Bottom base
USING METHODS
Put the machine to a at place. Screw the
coffee container smoothly in clockwise
direction. If you can‘t screw it smooth, don‘t
continue. Screw back and re-screw till it
is smooth. After screwing the container to
the proper place, there is a CLICK voice, it
means the safe button for the main body is
locked, then you can screw the mark on the
coffee containers to match the place your
required crudeness or neness effect.
Open the lid, put the request coffee bean
into the container (g. 1)
Pull out the coffee powder container,
screw the knob on top of cover, till the
container completely opened (See „X“
shows mouth to mouth in g. 2). Then
the coffee powder can be spill out freely.
If you want to keep the coffee powder in
the powder container, you can screw the
knob on top of cover till the container is
completely closed, then you can stock
the coffee powder.
Screw the time switch button to the place
which is matching with your putted coffee
beans, release your hand and the time
switch will return to OFF position after
time is up, the machine will stop.
OPERATING INSTRUCTIONS:
Before you put and grind coffee beans, you
should adjust the coffee container‘s place to
t the effect of crudeness or neness (see
g. 4). There are 3 different options marked
„Coarse/Middle/Fine“.
The time marker (2, 4, 6, 8, 10, 12) (see g.
3) beside the screw, is matching with the
capacity of coffee power. For example, when
the time marker is in the position „2“, it means
it is the proper time for grinding 2 spoons of
coffee beans, which are for making 2 cups of
coffee.
Keep closing the container lid to retain
the Coffee fragrance
ENGLISH
Grinding the coffee strength you want.
Do not put exceed MAX capacity of
coffee beans (normally 100g for 12 cups
of coffee)
Operation period shall not exceed 2
cycles continuous, interval 1 minute
between 2 cycles. After operating 2
cycles let the main body rest to room
temperature for the next 2 cycles to avoid
the appliance overheating.
Please set Timer no longer than 60s.
CLEANING
Be sure that plug cord has been removed
from outlet
Do not immerse the unit into the water.
Clean the lid, coffee bean container,
coffee powder container by neutral lition,
then wash them with clean water an towel
off them. Put back the coffee bowl to the
place and turn the screw in a clockwise
direction till it‘s on the place of your
required defree of crudeness or ness.
Suggesting to use a brush to clear away
the coffee power which residues in the
inner cup. (g. 5)
After washing polish the cover with a dry
cloth.
The cord could be winded into the base
unit that has a cord storage compartment.
SPECIFICATON:
220-240V ~ 50/60Hz • 100W
Correct Disposal of this product
This marking indicates that this product
should not be disposed with other
household wastes throughout the EU. To
prevent possible harm to the environment or
human health from uncontrolled waste
disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To
return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
They can take this product for environmental
safe recycling.
ENGLISH

Содержание

Похожие устройства