Kitano KC-Montaro II-48 [38/68] Cassette type air conditioners montaro ii series

cassette type air conditioners, Montaro II series

5.2.2. Operation procedure

5.2.2.1. When the wired controller is powered for the first time, the LCD display will

illuminate all characters for 2 seconds, and the wired controller will initiate the latest

setting before the wired controller is powered off, including the mode, temperature,

date, time and timer settings.

5.2.2.2. Press button to turn on air conditioner. Then power light will be lit and

LCD screen will display current system settings. Press button again to turn off air

conditioner. Then power light will switch off and LCD screen will display time. If wired

controller power supply is disconnected and then reconnected again wired controller

will resume operation based on the settings used prior to power failure.

5.2.2.3. When unit is running, button on wired controller is available. And

mode can be changed according to the following order by pressing button :

Auto – Cool – Dry – Fan – Heat – Auto

While unit is running on cooling mode or heating mode, setting temperature range

is 16 - 31°С, fan speed can be low, medium, high and auto.

While unit is running on fan mode, temperature can’t be changed, fan speed can be

low, medium, high and auto.

While unit is running on dry mode, setting temperature is 26°С and can’t be changed,

fan speed is low and can’t be changed.

5.2.2.4. While unit is running on cooling mode or heating mode, press button ▲ to

increase required temperature or press button ▼ to decrease required temperature.

The max required temperature is 31°С, the min required temperature is 16°С.

5.2.2.5. Press button to change fan speed. Button is only available in auto,

cooling, heating and fan mode. The fan speed is low in dry mode and can’t be changed.

5.2.2.6. Press button to check indoor temperature(Т1), indoor tube

temperature(Т2), outdoor tube temperature(Т3). If button is not pressed within 10

seconds, the temperature area of screen will display setting temperature.

5.2.2.7. Press button , icon A which stands for room A will be flashing and icon

will be light. If user press the button again, icon will be off, and damper of room

A will be off. If icon

is light, users can choose required zone by pressing button ▲

or ▼, then required room icon will be light. If other zone dampers are switched off, the

last one can’t be switched off to ensure safety. After completing zone setting, user can

save setting by pressing button .