Home
Главная
Vitek
Утюг
VT-1229
Инструкция по эксплуатации Страница: 6

Vitek VT-1229 [6/48] English

ENGLISH

will be done, indicator will light (6).

− When the soleplate (13) warms up to the cho-

sen temperature and the indicator (6) goes

off, you can start ironing.

Note:

− When you turn on the iron for the first time,

the heating element of the iron burns, so you

may receive a small amount of smoke or a ex-

traneous smell, that is normal.

Water spray

− You can moisten the cloth, pressing several

times to spray button (5) (Fig. 2).

− Make sure that the tank (10)has enough wa-

ter.

Dry ironing

− Put the iron on the base (8).

− Plug the power cord into an outlet.

− Turn the regulator(9), set the desired temper-

ature of ironing: «•», «• •», «• • •» or «MAX»,

depending on tissue type, with indicator lights

(6).

− Set the constant supply of steam (4) to « »

position (steam off).

− When the soleplate is heated to the desired

temperature, the indicator (6) goes off, you

can start ironing.

− After use, set the iron temperature controller

(9) to position «MIN».

− Remove the plug from the wall outlet and wait

until iron get cool iron.

Steam ironing

Iron is equipped with a drip valve that shuts off

the water supply at very low temperature of the

soleplate, it prevents the droplets from the open-

ings of the soleplate (13). When the soleplate be

heating and cooling, you will hear a distinctive

clicking of opening / closing of stop valve, which

indicates its normal operation.

− Put the iron on the base (8).

− Plug the power cord into an outlet.

− Make sure that the tank (10) enough water.

− Turn the regulator(9) set the desired tem-

perature of ironing: in the work of area with

«MAX» steam the indicator lights (6).

− When the soleplate (13) is heated to the de-

sired temperature, the indicator (6) goes off,

you can start ironing.

− With the steam regulators (4) set the required

intensity of evaporation, steam will come out

of the hole soleplate (13) (Fig. 4).

− After the use, set the iron temperature con-

troller (9) to position «MIN», and the constant

control of steam (4) to « » (steam off).

− Remove the plug from the wall outlet and wait

until iron became cool.

WARNING!

If during operation there is no constant supply of

steam, make sure that the position of the regula-

tor of the steam is correct(4) and make sure you

have water in the tank.

Additional steam supply

Additional function of steam is useful for iron-

ing of wrinkles and can only be used with high

temperature ironing (temperature controller (9)

in «MAX» position).

When you press the steam button (3) intense

steam will come out of the soleplate.

Note:

− To avoid leakage of water from the steam

holes, press the button of additional steam

(3) with an interval of 4-5 seconds.

Vertical steaming

Vertical steam function can only be used in high

temperature ironing (temperature controller (9)

in «MAX» position).

Hold the iron vertically at a distance of 10-30 cm

from the garment and press the steam button (3)

with an interval of 4-5 seconds, the steam will rap-

idly get out of the soleplate holes (13) (Fig. 5).

Important information

− Do not perform a vertical steaming for syn-

thetic fabrics.

− When steaming, do not touch the material

with the soleplate to avoid melting.

− Never steam clothes, when it is on a person

because temperature of the steam is very

high, use a coat or clothes hanger.

−

Once you’ve finished ironing, turn off the iron,

wait until it cools, then open the filler cap (2),

turn the iron and pour off excess water (Fig. 6).

Cleaning of the steam chamber

To extend the life of the iron it is recommended

to perform regular cleaning of the steam cham-

Vitek VT-1229 [6/48] English

Содержание

Похожие устройства